CEB: Difference between revisions

Latest revision as of 16:20, 13 July 2019

Redirect to:

@@ Line 1: / Line 1: @@
-=Steps=
+#redirect [[CEB Press]]
-*Lay small concrete blocks or pads along the exterior perimeter of the building; use waterproof sealing compound to ensure zero water penetration underneath these blocks/pads
-*Ready the dirt site for loading desirable dirt by clearing away the topsoil.
-*Position the CEB Press such that its output can be carried by rollers to the area where the next wall will be constructed.
-*Start mixing batches of slurry to be used for adhering the CEBs together.
-*Operate the CEB Press, loading and unloading dirt into its hopper.
-*Apply slurry at the top face of the existing CEB wall (if none, apply on the concrete); also slurry side faces on the existing wall that can be contacted by the next block to be laid.
-*Lay a block on the slurried surface and position it evenly with contact on the slurried side face.
-*Keep operating the CEB Press, mixing batches of slurry, and laying blocks until the wall is complete.
-*Reposition the CEB Press for further wall construction.
-*Rework the dirt extraction site if the piles of usable dirt are dwindling.