Settings Data: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
| Line 1: | Line 1: | ||
=v19.06 1= | |||
600 mm/sec acceleration on x and y, and 100 on z. | |||
=v19.06 2= | |||
3000 mm/sec acceleration on x and y, and 100 on z. | |||
=v19.06 3= | |||
*Voltage on stepper driver - E, x, y - 0.5V; z is 1.05V | |||
*Without power, heat bed was at 120V. Fixed a short in heat element. After that, Bed plate metal with reference to metal frame is 16. Is that inductive voltage from the AC in the bed? | |||
Revision as of 22:01, 7 October 2019
v19.06 1
600 mm/sec acceleration on x and y, and 100 on z.
v19.06 2
3000 mm/sec acceleration on x and y, and 100 on z.
v19.06 3
- Voltage on stepper driver - E, x, y - 0.5V; z is 1.05V
- Without power, heat bed was at 120V. Fixed a short in heat element. After that, Bed plate metal with reference to metal frame is 16. Is that inductive voltage from the AC in the bed?