Pyrolysis Oil from Biomass: Difference between revisions

From Open Source Ecology
Jump to navigation Jump to search
(→‎Introduction: fixed a couple of inaccuracies)
m (redirected and merged)
 
(4 intermediate revisions by the same user not shown)
Line 1: Line 1:
{{Category=Biofuel}}
#redirect [[Pyrolysis Oil]]
=Introduction=
 
Pyrolysis Oil is a product of anoxic ("destructive") distillation of biomass. Upon heating of wood or other biomass to sufficient temperature in an air-tight chamber, volatile components are produced. After cooling, some of these are gaseous (hydrogen, carbon monoxide) while others are in liquid form, the so-called '''pyrolysis oil'''. This oil is a dense fuel source - for applications such as heating and steam production. It may be burned by a burner such as the [[Babington_Burner]]. As such, this is a lower-tech substitute for petroleum fuels, with lower caloric value than diesel fuel. At present, it cannot be substituted for diesel in internal-combustion engines due to high viscosity and acidity.
Both [http://openfarmtech.org/index.php?title=Biomass_to_FuelFischer-Tropsch synthesis] and pyrolysis oil are one way towards a biofuel future. However, upgrading of bio-oil to diesel may not be practical.
 
=Student Projects=
 
A great experiment that can be done in a semester is the construction of a simple distillation apparatus to test the procedure with wood chips or newspaper - and to measure the purity and composition of the resulting fuel.
 
==Basic Experiment==
 
A basic experiment can be performed readily by heating biomass in a 55 gallon metal drum. An external fire may be applied, or an electric heating element may be installed. The vapors that come off can be sent into another drum, submerged in cool water for condensation to occur. A weep hole is put in the second drum for pressure release, and gases may be flared, or captured, at this outlet as the reaction proceeds. When all biomass is distilled, the flare gassing will stop.
 
[[Image:pyroil.jpg]]
 
The resulting product can then be analyzed.
 
*Flammability test
**Is fuel readily usable in a [Babington burner]?
*Heating to drive off water
*Heating to drive off lighter fractions to produce fuel oil
*Further heating to provide heavier oils or lubricants
*Cooling to separate phases
*Freezing to separate phases or to separate water
 
=More Information=
 
[[Image:pyrolysisintro.jpg]]
 
[[Image:pyrolysisintro2.jpg]]
 
=Contact=
 
contact joseph.dolittle at gmail dot com for more information

Latest revision as of 17:12, 7 March 2011

Redirect to: