Flexible Build Plate: Difference between revisions

From Open Source Ecology
Jump to navigation Jump to search
Line 7: Line 7:
*Buildtak does not provide enough adhesion for ABS without heat - [http://3dprintingforbeginners.com/buildtak-review/]
*Buildtak does not provide enough adhesion for ABS without heat - [http://3dprintingforbeginners.com/buildtak-review/]
*Spring steel plate is cheap at $3 for a 6"x6" plate from Amazon, 0.01" thick - [https://www.amazon.com/Spring-Steel-Sheet-Temper-Length/dp/B00065UZOU/ref=sr_1_3?keywords=spring+steel+plate&qid=1575512636&s=industrial&sr=1-3]
*Spring steel plate is cheap at $3 for a 6"x6" plate from Amazon, 0.01" thick - [https://www.amazon.com/Spring-Steel-Sheet-Temper-Length/dp/B00065UZOU/ref=sr_1_3?keywords=spring+steel+plate&qid=1575512636&s=industrial&sr=1-3]
*0.012 thick is $2 for a 6x6" plate at McMaster. [https://www.mcmaster.com/9036k493]

Revision as of 03:15, 5 December 2019

  • 120C - [1]
  • 80C - [2]
  • Magnetic plate for 105C is cheap, but textured spring steel PEI surface is not at $30 minimum - [3] - + PEI spring steel sheet - [4]
  • 6x6" spring steel is $2 for 6"x6" sheet - [5]

Notes

  • Buildtak does not provide enough adhesion for ABS without heat - [6]
  • Spring steel plate is cheap at $3 for a 6"x6" plate from Amazon, 0.01" thick - [7]
  • 0.012 thick is $2 for a 6x6" plate at McMaster. [8]
Retrieved from "https://wiki.opensourceecology.org/index.php?title=Flexible_Build_Plate&oldid=204658"