Revision as of 08:03, 12 December 2019

Notes

Bug report - set screw for sensor has too much meat on it - need to trim it. Need to seat motor on main part 2 mm lower.
02:05, 11 December 2019 - second one - is the correct one.
23:17, 5 December 2019 version does not have trimmed sensor holder nor correct fan bolt holes. These have been corrected in the sensor holder individual part.

Warning: The second 02:05, 11 December 2019 file is the correct one.

Click on a date/time to view the file as it appeared at that time.

	Date/Time	Dimensions	User	Comment
current	07:39, 9 January 2020	(786 KB)	Marcin (talk \| contribs)	With updated parts.
	08:05, 11 December 2019	(316 KB)	Marcin (talk \| contribs)
	04:45, 8 December 2019	(316 KB)	Marcin (talk \| contribs)	With fixed heatsink.
	04:33, 8 December 2019	(314 KB)	Marcin (talk \| contribs)	Beginning to fix heat sink.
	04:13, 8 December 2019	(212 KB)	Marcin (talk \| contribs)	Fan included, thinner right side by 0.7 mm.
	05:17, 6 December 2019	(94 KB)	Marcin (talk \| contribs)	Dumb object to this point.
	05:12, 6 December 2019	(170 KB)	Marcin (talk \| contribs)	Added motor.
	05:05, 6 December 2019	(166 KB)	Marcin (talk \| contribs)	Merged tensioner and bearing.
	04:58, 6 December 2019	(156 KB)	Marcin (talk \| contribs)	Fixed hole alignment.
	04:50, 6 December 2019	(76 KB)	Marcin (talk \| contribs)	Upper hole does not line up.

You cannot overwrite this file.

The following 4 pages use this file:

@@ Line 1: / Line 1: @@
 =Notes=
+*Bug report - set screw for sensor has too much meat on it - need to trim it. Need to seat motor on main part 2 mm lower.
 *'''02:05, 11 December 2019''' - second one - is the correct one.
 *'''23:17, 5 December 2019''' version does not have trimmed sensor holder nor correct fan bolt holes. These have been corrected in the sensor holder individual part.
 {{Warning|The second '''02:05, 11 December 2019''' file is the correct one.}}