Moarstruder: Difference between revisions

From Open Source Ecology
Jump to navigation Jump to search
No edit summary
No edit summary
 
(3 intermediate revisions by the same user not shown)
Line 1: Line 1:
=Introduction=
The Moarstruder is a fast printing extruder for the Lulzbot printer that serves as a good benchmark for 3D printer extrusion rates.
*https://www.lulzbot.com/store/tool-heads/lulzbot-taz-moarstruder-tool-head
*https://www.lulzbot.com/store/tool-heads/lulzbot-taz-moarstruder-tool-head
*5 lbs per 24 hr print rate
*5 lbs per 24 hr print rate


=CAD=
=CAD - from Lulzbot site [https://www.lulzbot.com/store/tool-heads/lulzbot-taz-moarstruder-tool-head]=
*Nozzle - freeCAD - [[File:Moarstrudernozzle.fcstd]]
*Nozzle - freeCAD - [[File:Moarstrudernozzle.fcstd]]
*Heater block - [[File:Moarstruderheaterblock.fcstd]]
=BOM=
*117 parts for Moarstruder - [[File:moarstruderBOM.ods]]
*About 4000 parts for MBOM inlcuding parts, shipping, supplies - essentially the entire business across product lines - 161 bolts alone. [[File:lulzbotmasterBOM.ods]]

Latest revision as of 07:24, 16 December 2019

Introduction

The Moarstruder is a fast printing extruder for the Lulzbot printer that serves as a good benchmark for 3D printer extrusion rates.

CAD - from Lulzbot site [1]

BOM