Open Source Bandsaw Mill 3D CAD: Difference between revisions
Jump to navigation
Jump to search
(Created page with "*FreeCAD 17 - https://github.com/nsuitter/OSE/blob/FreeCad-v0.17/Bandsaw_Mill/Bandsaw%20mill.FCStd *FreeCAD 15 - atible with v0.15: https://github.com/nsuitter/OSE/blob/FreeCa...") |
No edit summary |
||
| (One intermediate revision by the same user not shown) | |||
| Line 1: | Line 1: | ||
*FreeCAD 17 - https://github.com/nsuitter/OSE/blob/FreeCad-v0.17/Bandsaw_Mill/Bandsaw%20mill.FCStd | *FreeCAD 17 - https://github.com/nsuitter/OSE/blob/FreeCad-v0.17/Bandsaw_Mill/Bandsaw%20mill.FCStd | ||
*FreeCAD 15 - atible with v0.15: https://github.com/nsuitter/OSE/blob/FreeCad-v0.15/Bandsaw_Mill/Bandsaw%20mill.FCStd | *FreeCAD 15 - atible with v0.15: https://github.com/nsuitter/OSE/blob/FreeCad-v0.15/Bandsaw_Mill/Bandsaw%20mill.FCStd | ||
=Build Notes= | |||
Differences: I made it as close to the original as I could (within 1/8") with the exception of: | |||
Moving the blade guide mounts from the front to the back (motor side) of the left assembly uprights | |||
Adding proper bandsaw blade rollers instead of the roller blade bearings that we currently use | |||
=Links= | |||
*[[Open Source Bandsaw Mill]] | |||
Latest revision as of 00:54, 5 May 2020
- FreeCAD 17 - https://github.com/nsuitter/OSE/blob/FreeCad-v0.17/Bandsaw_Mill/Bandsaw%20mill.FCStd
- FreeCAD 15 - atible with v0.15: https://github.com/nsuitter/OSE/blob/FreeCad-v0.15/Bandsaw_Mill/Bandsaw%20mill.FCStd
Build Notes
Differences: I made it as close to the original as I could (within 1/8") with the exception of: Moving the blade guide mounts from the front to the back (motor side) of the left assembly uprights Adding proper bandsaw blade rollers instead of the roller blade bearings that we currently use