Open Source Bandsaw Mill Build Pictures and Video: Difference between revisions
Jump to navigation
Jump to search
(Created page with "https://drive.google.com/drive/folders/19QpPvPZ6XC1K8qlHS9KJEtVWYgO8Qbjd") |
No edit summary |
||
| Line 1: | Line 1: | ||
https://drive.google.com/drive/folders/19QpPvPZ6XC1K8qlHS9KJEtVWYgO8Qbjd | https://drive.google.com/drive/folders/19QpPvPZ6XC1K8qlHS9KJEtVWYgO8Qbjd | ||
Differences: I made it as close to the original as I could (within 1/8") with the exception of: | |||
Moving the blade guide mounts from the front to the back (motor side) of the left assembly uprights | |||
Adding proper bandsaw blade rollers instead of the roller blade bearings that we currently use | |||
Latest revision as of 03:47, 20 May 2020
https://drive.google.com/drive/folders/19QpPvPZ6XC1K8qlHS9KJEtVWYgO8Qbjd
Differences: I made it as close to the original as I could (within 1/8") with the exception of: Moving the blade guide mounts from the front to the back (motor side) of the left assembly uprights Adding proper bandsaw blade rollers instead of the roller blade bearings that we currently use