Open Source Metal Detector Conceptual Design: Difference between revisions
Jump to navigation
Jump to search
(Created page with "From [https://hackaday.io/project/171177-diy-simple-smartphone-metal-detector] - This is a VLF (very low frequency) detector tecnology and contains two idenmtical coils : tran...") |
(No difference)
|
Revision as of 12:03, 20 May 2020
From [1] - This is a VLF (very low frequency) detector tecnology and contains two idenmtical coils : transmiter and receiver coil. In this case each coil contain 55 windings of isolated copper wire with a diameter of approximately 0.5 mm2 . We bend the coils into a shape called a "double D" according to the template you can download at the link below , where you can also download the complete scheme.