Fab Lab Phase 2: Difference between revisions

From Open Source Ecology
Jump to navigation Jump to search
(New page: Phase 2 of Fab Lab development centers around the replacement of the components used in Phase 1 with open source alternatives. The components that are added/substituted to the Phase 1 Fab ...)
(No difference)

Revision as of 17:32, 13 June 2008

Phase 2 of Fab Lab development centers around the replacement of the components used in Phase 1 with open source alternatives. The components that are added/substituted to the Phase 1 Fab Lab package are:

  1. Open source MIG welder
  2. Open source plasma cutter
  3. Motor fabrication - stepper motors for CNC control, Multimachine drive motors, power generators, hydraulic motors and cylinders (linear motors), including the feasibility of hydraulic motors operating with natural oils or water as the working fluid
  4. Circuits - open source CNC controllers
  5. Fabrication of drilling, milling, and lathing bits
  6. Fabrication of other tooling
Retrieved from "https://wiki.opensourceecology.org/index.php?title=Fab_Lab_Phase_2&oldid=2217"