Dirk 3D Printed Electric Motor Build Instructions: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
| Line 1: | Line 1: | ||
=Intro= | =Intro= | ||
This was built, produced 30W with a single stator + 2 rotors. Because the stators are harder to build, 2 rotors were used instead | This was built, produced 30W with a single stator + 2 rotors. Because the stators are harder to build, 2 rotors were used instead to optimize magnetic field usage. | ||
<html><iframe src="https://docs.google.com/document/d/e/2PACX-1vR8yJ6Zb-UYiMHD0RZGoi6tnyxP5FKXcxoKaEYV8P2usPyYC0gk2h4yFXafK6PCHA/pub?embedded=true" height=500 width=800></iframe></html> | <html><iframe src="https://docs.google.com/document/d/e/2PACX-1vR8yJ6Zb-UYiMHD0RZGoi6tnyxP5FKXcxoKaEYV8P2usPyYC0gk2h4yFXafK6PCHA/pub?embedded=true" height=500 width=800></iframe></html> | ||
[https://docs.google.com/document/d/11zQrNhCqZO4Ikrfj5OuRLKsffCw4YDv6/edit edit] | [https://docs.google.com/document/d/11zQrNhCqZO4Ikrfj5OuRLKsffCw4YDv6/edit edit] | ||
Revision as of 22:30, 1 August 2020
Intro
This was built, produced 30W with a single stator + 2 rotors. Because the stators are harder to build, 2 rotors were used instead to optimize magnetic field usage.