April 2011 Production Run Bolts BOM

Tractor

Functionality list:

• [22] 5"bolts+nuts + [44] washers to suit to attach re-enforcing tubes, angle-irons & H/cylinders to L-arms.
• [4] 3/4"x4.5" bolts; [8] nuts; [4] nylon lock nuts. Mounting of wheel bushings to wheel shafts.
• [40] 3/4x5-1/2", with [40] washers for one side and [40] metal lock nuts for the other side. For wheel plates & cylinder plates.
• [42] 3/4"x9" bolts, [80] washers, and [40] metal lock nuts. This is for the assembly of the main frame.
• [16] 1/2"x2" bolts + [16] nylon lock nuts + [16] lock washers to suit. Motor attachment to motor QA/interface plate. Equivalent to 32" of threaded rod.
• [8] 3/4"x2" bolts for motor; [8] nuts to weld; [8] lock washers. Attachment of motor interface plate to frame.
• [32] 5/8"x2"bolts + [32] metal lock nuts, [32] lock washers to suit. Mounting of bearings to frame.
• [32] 9/16"x2" fine thread bolts, [32] washers, [32] nylon lock nuts. Attachment of wheel to wheel hub. Includes studs, nuts, and washers.

TOTALS:

• [40] 3/4"x5.5" bolts
• [42] 3/4"x9" bolts
• [4] 3/4"x4.5" bolts
• [8] 3/4"x2" bolts
• [120] 3/4" washers
• [80] 3/4" metal lock nuts
• [16] 3/4" nuts
• [4] 3/4" nylon lock nuts
• [8] 3/4" lock washers

• [16] 1/2"x2" bolts
• [16] 1/2" nylon lock nuts
• [16] 1/2" lock washers

• [32] 5/8"x2" bolts
• [32] 5/8" metal lock nuts
• [32] 5/8" lock washers

• [32] 9/16"x2" bolts
• [32] 9/16" washers
• [32] 9/16" nylon lock nuts

CEB Press Bolts

   * Frame: [16] grade 8, 1/2"x1.5" bolts, with lock washers and nuts
   * Frame: [16] 1/2"x1.5" bolts, with lock washers and nuts
   * Main cylinder adjustment, front to back: [2] 1/2"x1.5" bolts with nuts
   * Main cylinder adjustments, 3/4"x______________ (can use threaded rod with welded nut: 2 feet of rod, [2] 3/4" nuts
   * Hopper edge stubs - [12] 1" stubs or 1/2"x1" bolts, [12] washers, [12] nylon lock nuts.
   * Hopper mount plate - [6] 3/4" nuts, 4 washers, [4] 3/4x1.5" bolts
   * Primary arms: [4] 3/4"x2" bolts, [4] washers, [4] nuts (welded to frame)
   * Attachment of secondary arms to primary arms": [6] 3/4"x2" bolts (4 for cylinder attachment side, 2 for other side) with [6] nuts and [6] washers.
   * Attachment of all adjustable parts: 3/4"x1.5" bolts: [12] for adjustable legs and feet plus nuts; [2] for rear, vertical hopper supports plus nuts;
   * Roller guides - [2] 1/2"x2" with [2] nylon lock nuts
   * Roller guide adjusters - [4] 1/2"x2" bolts with [4] nuts.
   * 8 holes for tables - [8] 1/2"x1/5" bolts, [8] washers, [8] nylon lock nuts
   * Front hopper supports - [2] 3/4"x2" bolts, [2] nuts, [2] washers
   * Soil sensor - [2] 1/2"x2" with [2] nylon lock nuts and [2] washers (attachment); [1] 1/2"x1" with [1] nut; [1] 1/2x2.5" with [1] washer and [1] nylon locknut for the inside; [1] 1/2"x1.5" with [1] nylon locknut and [1] washer
   * Grate mounting:
   * Hopper shaker mounting:
   * Hopper shaker assembly: [4] 3/8"x2" bolts with [4] lock nuts, [4] lock washers; use keyed shaft for mounting to motor