Revision as of 02:51, 7 December 2020

PTO Motors

1 cu in, 3000 RPM cont, 2500 PSI, 15 GPM requirement, 5/8" shaft - $220 - [1]
1.5 cu in, 7/8 13T spline - 20 gpm for 3000 RPM - $130 - [2]. Needs coupler - [3]

BMER-2-250 - 6000 in lb [4]. 1.25" taper. With castille nut, easier mounting.
Bailey, 6000 in lb , $350 [5]
14 cu in 6000 in lb, $330 [6]
13k in lb - $1300 - Charu-Lynn [7]
9000 in lb $549 [8]

Motor Types - [9]
BMER 2 - ex 9000 in lb - BMER 2 750 - [10]. BMER2-750 - https://www.onehydraulics.com/products/bmer-2-750-fs-g2-s-r]. BMER2-125 is smallest - 3000 in lb - [11]
- BMER 1 230 and up is 5000 in lb [12]
BMH 500 - 7000 in lb - [13]
BMK 6 1000 - 15000 in lb - [14]
BMPH 400 - 3000 in lb and $200 [15]. Or up to 4000 psi. [16]
BMSY 400 - 8000 in lb [17]
BMT 250 to 800 is good - 5000 in lb to 12000 in lb [18]
BMV series are large mothers - 40 gpm and 8000-16000 in lb [19]

@@ Line 7: / Line 7: @@
 =High Torque=
-*BMER-2-250 - 6000 in lb [https://www.fremontindustrialsupply.com/products/dynamic-fluid-components-bmer-2-250-ws-g2-s-r-hydraulic-motor-low-speed-high-torque-15-68-cubic-inch-displacement.html]. 1.25" taper.
+*'''BMER-2-250 - 6000 in lb [https://www.fremontindustrialsupply.com/products/dynamic-fluid-components-bmer-2-250-ws-g2-s-r-hydraulic-motor-low-speed-high-torque-15-68-cubic-inch-displacement.html]. 1.25" taper.''' With castille nut, easier mounting.
 *Bailey, 6000 in lb , $350 [https://www.baileyhydraulics.com/Chief-BMSY-Hydraulic-Motors-15-4-C-I-D-300-RPM-3983-Torque_2]
 *14 cu in 6000 in lb, $330 [https://www.surpluscenter.com/Hydraulics/Hydraulic-Motors/Wheel-Mount-Hydraulic-Motors/13-91-cu-in-Dynamic-BMER-2-230-WS-T4-Wheel-Motor-9-8592-230.axd]