Hydraulic Motors: Difference between revisions
Jump to navigation
Jump to search
| Line 17: | Line 17: | ||
=3000 In Lb Range= | =3000 In Lb Range= | ||
*Note - these are much cheaper than the 5000 in lb + range. | *Note - these are much cheaper than the 5000 in lb + range. | ||
*$109 - 3000 in lb [https://www.surpluscenter.com/Hydraulics/Hydraulic-Motors/Low-Speed-High-Torque-Hydraulic-Motors/15-18-cu-in-Danfoss-DS250-151-2477-Hydraulic-Motor-9-10987-D.axd] | |||
=BMER-2 Specs= | =BMER-2 Specs= | ||
Revision as of 05:30, 7 December 2020
PTO Motors
- See PTO Motors
High Speed
- 1 cu in, 3000 RPM cont, 2500 PSI, 15 GPM requirement, 5/8" shaft - $220 - [1]
- 1.5 cu in, 7/8 13T spline - 20 gpm for 3000 RPM - $130 - [2]. Needs coupler - [3]
High Torque
- BMER-2-250 - 6000 in lb [4]. 1.25" taper. With castille nut, easier mounting. But CCW rotation, not reversible?
BMER-2-250- taper or straight - $330 - [5]- Note you can get BMER-2-350 for just a little more, at 33% extra torque.
- Bailey, 6000 in lb , $350 [6]
- 14 cu in 6000 in lb, $330 [7]
- 13k in lb - $1300 - Charu-Lynn [8]
- 9000 in lb $549 [9]
3000 In Lb Range
- Note - these are much cheaper than the 5000 in lb + range.
- $109 - 3000 in lb [10]
BMER-2 Specs
- Tech sheet - [11]
Part Numbers
- Motor Types - [12]
- BMER 2 - ex 9000 in lb - BMER 2 750 - [13]. BMER2-750 - https://www.onehydraulics.com/products/bmer-2-750-fs-g2-s-r]. BMER2-125 is smallest - 3000 in lb - [14]
- BMER 1 230 and up is 5000 in lb [15]
- BMH 500 - 7000 in lb - [16]
- BMK 6 1000 - 15000 in lb - [17]
- BMPH 400 - 3000 in lb and $200 [18]. Or up to 4000 psi. [19]
- BMSY 400 - 8000 in lb [20]
- BMT 250 to 800 is good - 5000 in lb to 12000 in lb [21]
- BMV series are large mothers - 40 gpm and 8000-16000 in lb [22]