Open Source In-Line Duct Fan: Difference between revisions
Jump to navigation
Jump to search
(Added some more links under the "External Links" section) |
(Added some more links under the "External Links" section) |
||
| (One intermediate revision by the same user not shown) | |||
| Line 3: | Line 3: | ||
*Use One Per Zone, and thus allow for a per zone [[Variable Air Flow]] system (also software control of all the rates etc | *Use One Per Zone, and thus allow for a per zone [[Variable Air Flow]] system (also software control of all the rates etc | ||
*Need to see if "blast gates" would still be needed/useful | *Need to see if "blast gates" would still be needed/useful | ||
*Main use is in an HVAC or solely Ventilation system for a building, but it would also have use for greenhouses, and fume hoods/laminar flow hoods etc | |||
=Internal Links= | =Internal Links= | ||
* | * | ||
| Line 9: | Line 10: | ||
=External Links= | =External Links= | ||
*[https://www.acinfinity.com/blog/the-differences-between-inline-duct-fans-duct-fan-boosters/ A Article on "Duct Boosters" vs "Inline Fans" ] (both good amazon search terms etc) | *[https://www.acinfinity.com/blog/the-differences-between-inline-duct-fans-duct-fan-boosters/ A Article on "Duct Boosters" vs "Inline Fans" ] (both good amazon search terms etc) | ||
*[https://www.youtube.com/watch?v=1fVT1okcIEc A Video by the Youtube Channel "Indeterminate Design" titled "3D Printed Centrifugal Turbo Compressor" ] (intended as a ICE [[Turbocharger]] compressor, but essenially is great for this exact purpose, with some minor modifications, or used in a non "in-line" setup! ) | |||
[[Category: HVAC]] | [[Category: HVAC]] | ||
Latest revision as of 15:44, 10 December 2020
Basics
- A Fan powered by a Brushless DC Motor that is placed in-line with Ductwork to propel the air
- Use One Per Zone, and thus allow for a per zone Variable Air Flow system (also software control of all the rates etc
- Need to see if "blast gates" would still be needed/useful
- Main use is in an HVAC or solely Ventilation system for a building, but it would also have use for greenhouses, and fume hoods/laminar flow hoods etc
Internal Links
External Links
- A Article on "Duct Boosters" vs "Inline Fans" (both good amazon search terms etc)
- A Video by the Youtube Channel "Indeterminate Design" titled "3D Printed Centrifugal Turbo Compressor" (intended as a ICE Turbocharger compressor, but essenially is great for this exact purpose, with some minor modifications, or used in a non "in-line" setup! )