April 2011 Production Run Bolts BOM: Difference between revisions

From Open Source Ecology
Jump to navigation Jump to search
 
(6 intermediate revisions by the same user not shown)
Line 1: Line 1:
=Tractor=
=Tractor (1 tractor)=


Functionality list:
Functionality list:
*[22] 5"bolts+nuts + [44] washers to suit to attach re-enforcing tubes, angle-irons & H/cylinders to L-arms.
*<span style="color:green">[4] 3/4"x4.5" bolts; [8] nuts; [4] nylon lock nuts. Mounting of wheel bushings to wheel shafts.
*<span style="color:green">[40] 3/4x5-1/2", with [40] washers for one side and [40] metal lock nuts for the other side. For wheel plates & cylinder plates.
*<span style="color:green">[42] 3/4"x9" bolts, [80] washers, and [40] metal lock nuts. This is for the assembly of the main frame.
*<span style="color:green">[16] 1/2"x2" bolts + [16] nylon lock nuts + [16] lock washers to suit. Motor attachment to motor QA/interface plate. <span style="color:blue"> Equivalent to 32" of threaded rod.
*<span style="color:green">[8] 3/4"x2" bolts for motor; [8] nuts to weld; [8] lock washers. Attachment of motor interface plate to frame.
*<span style="color:green">[32] 5/8"x2"bolts + [32] metal lock nuts, [32] lock washers to suit. Mounting of bearings to frame.
*<span style="color:green">[32] 9/16"x2" fine thread bolts, [32] washers, [32] nylon lock nuts. Attachment of wheel to wheel hub. Includes studs, nuts, and washers.


TOTALS:
3/4”:
 
*[14] 5"bolts+[14] nuts + [44] washers to suit front loader
*[8] 4.5” bolts + [8] nuts bolts if available, if not, add to above
*[4] 4.5" bolts; [8] nuts; [4] nylon lock nuts. Mounting of wheel bushings to wheel shafts.
*[32] 5-1/2", with [32] washers for one side and [32] metal lock nuts. For wheel plates & cylinder plates.
*[42] 3/4"x9" bolts, [84] washers, and [42] metal lock nuts. This is for the assembly of the main frame.
*[16] 1/2"x2" bolts + [16] nylon lock nuts + [16] lock washers to suit. Motor attachment to motor QA/interface plate. <span style="color:blue"> Equivalent to 32" of threaded rod.
*[8] 3/4"x2" bolts for motor; [8] nuts to weld; [8] lock washers. Attachment of motor interface plate to frame,
*[32] 5/8"x2"bolts + [32] metal lock nuts, [32] lock washers to suit. Mounting of bearings to frame.
*[32] 9/16"x1.5" bolts, [32] washers, [32] nylon lock nuts. Attachment of wheel to wheel hub. Includes studs, nuts, and washers. (2” will do if no 1.5)
*[6] 5.5” for power cube mounts, [6] metal lock, [6] washers
*[2]  5”x1/2” for valve mounts [2]nuts and [2] washers
.
 
TOTALS (above is checked 4/29/00, totals here are not checked)


*<span style="color:green">[40] 3/4"x5.5" bolts
*<span style="color:green">[40] 3/4"x5.5" bolts
Line 35: Line 42:
*<span style="color:green">[32] 9/16" nylon lock nuts
*<span style="color:green">[32] 9/16" nylon lock nuts


=CEB Press Bolts=
=CEB Press Bolts (x1)=
 
*[32] 1/2"x1.5" bolts, [32] nuts, [32] washers
*[10] 1/2"x3" bolts, [10] nuts, [10] washers
*[32] 3/4"x1.5" bolts, [32] nuts
*[4] 12mmx50mm bolts, [12] nuts, [16] washers, [8] lock washers


*Frame: [16] grade 8, 1/2"x1.5" bolts, with lock washers and nuts
*<span style="color:green">Main cylinder adjustment, front to back: [2] 1/2"x1.5" bolts with nuts
*Frame: [16] 1/2"x1.5" bolts, with lock washers and nuts
*<span style="color:green">Main cylinder adjustments, 3/4"x______________ (can use threaded rod with welded nut: 2 feet of rod, [2] 3/4" nuts
*Main cylinder adjustment, front to back: [2] 1/2"x1.5" bolts with nuts
*<span style="color:green">Hopper shaker assembly: [4] 3/8"x2" bolts with [4] lock nuts, [4] lock washers; use keyed shaft for mounting to motor
*Main cylinder adjustments, 3/4"x______________ (can use threaded rod with welded nut: 2 feet of rod, [2] 3/4" nuts
*Hopper edge stubs - [12] 1" stubs or 1/2"x1" bolts, [12] washers, [12] nylon lock nuts.
*Hopper mount plate - [6] 3/4" nuts, 4 washers, [4] 3/4x1.5" bolts
*Primary arms: [4] 3/4"x2" bolts, [4] washers, [4] nuts (welded to frame)
*Attachment of secondary arms to primary arms": [6] 3/4"x2" bolts (4 for cylinder attachment side, 2 for other side) with [6] nuts and [6] washers.
*Attachment of all adjustable parts: 3/4"x1.5" bolts: [12] for adjustable legs and feet plus nuts; [2] for rear, vertical hopper supports plus nuts;
*Roller guides - [2] 1/2"x2" with [2] nylon lock nuts
*Roller guide adjusters - [4] 1/2"x2" bolts with [4] nuts.
*8 holes for tables - [8] 1/2"x1/5" bolts, [8] washers, [8] nylon lock nuts
*Front hopper supports - [2] 3/4"x2" bolts, [2] nuts, [2] washers
*Soil sensor - [2] 1/2"x2" with [2] nylon lock nuts and [2] washers (attachment); [1] 1/2"x1" with [1] nut; [1] 1/2x2.5" with [1] washer and [1] nylon locknut for the inside; [1] 1/2"x1.5" with [1] nylon locknut and [1] washer
*Grate mounting:
*Hopper shaker mounting:
*Hopper shaker assembly: [4] 3/8"x2" bolts with [4] lock nuts, [4] lock washers; use keyed shaft for mounting to motor


=Soil Pulverizer=
=Soil Pulverizer=
*1.5x½ stubs – 3 with washers for hinges
*[2]1"x3”, 2 metal lock nuts 2 nuts
*[8] 1.5"x1/2”  short bolt adjusters, [8] nuts
*[2] 5” x 3/4", washer + metal locknut
*[8] 2"x5/8” bolts + [8] metal locknuts


[[Category:LifeTrac III]]
[[Category:LifeTrac III]]
[[Category:April 2011 Production Run]]

Latest revision as of 08:13, 2 May 2011

Tractor (1 tractor)

Functionality list:

3/4”:

  • [14] 5"bolts+[14] nuts + [44] washers to suit front loader
  • [8] 4.5” bolts + [8] nuts bolts if available, if not, add to above
  • [4] 4.5" bolts; [8] nuts; [4] nylon lock nuts. Mounting of wheel bushings to wheel shafts.
  • [32] 5-1/2", with [32] washers for one side and [32] metal lock nuts. For wheel plates & cylinder plates.
  • [42] 3/4"x9" bolts, [84] washers, and [42] metal lock nuts. This is for the assembly of the main frame.
  • [16] 1/2"x2" bolts + [16] nylon lock nuts + [16] lock washers to suit. Motor attachment to motor QA/interface plate. Equivalent to 32" of threaded rod.
  • [8] 3/4"x2" bolts for motor; [8] nuts to weld; [8] lock washers. Attachment of motor interface plate to frame,
  • [32] 5/8"x2"bolts + [32] metal lock nuts, [32] lock washers to suit. Mounting of bearings to frame.
  • [32] 9/16"x1.5" bolts, [32] washers, [32] nylon lock nuts. Attachment of wheel to wheel hub. Includes studs, nuts, and washers. (2” will do if no 1.5)
  • [6] 5.5” for power cube mounts, [6] metal lock, [6] washers
  • [2] 5”x1/2” for valve mounts [2]nuts and [2] washers

.

TOTALS (above is checked 4/29/00, totals here are not checked)

  • [40] 3/4"x5.5" bolts
  • [42] 3/4"x9" bolts
  • [4] 3/4"x4.5" bolts
  • [8] 3/4"x2" bolts
  • [120] 3/4" washers
  • [80] 3/4" metal lock nuts
  • [16] 3/4" nuts
  • [4] 3/4" nylon lock nuts
  • [8] 3/4" lock washers
  • [16] 1/2"x2" bolts
  • [16] 1/2" nylon lock nuts
  • [16] 1/2" lock washers
  • [32] 5/8"x2" bolts
  • [32] 5/8" metal lock nuts
  • [32] 5/8" lock washers
  • [32] 9/16"x2" bolts
  • [32] 9/16" washers
  • [32] 9/16" nylon lock nuts

CEB Press Bolts (x1)

  • [32] 1/2"x1.5" bolts, [32] nuts, [32] washers
  • [10] 1/2"x3" bolts, [10] nuts, [10] washers
  • [32] 3/4"x1.5" bolts, [32] nuts
  • [4] 12mmx50mm bolts, [12] nuts, [16] washers, [8] lock washers
  • Main cylinder adjustment, front to back: [2] 1/2"x1.5" bolts with nuts
  • Main cylinder adjustments, 3/4"x______________ (can use threaded rod with welded nut: 2 feet of rod, [2] 3/4" nuts
  • Hopper shaker assembly: [4] 3/8"x2" bolts with [4] lock nuts, [4] lock washers; use keyed shaft for mounting to motor

Soil Pulverizer

  • 1.5x½ stubs – 3 with washers for hinges
  • [2]1"x3”, 2 metal lock nuts 2 nuts
  • [8] 1.5"x1/2” short bolt adjusters, [8] nuts
  • [2] 5” x 3/4", washer + metal locknut
  • [8] 2"x5/8” bolts + [8] metal locknuts
Retrieved from "https://wiki.opensourceecology.org/index.php?title=April_2011_Production_Run_Bolts_BOM&oldid=24026"