File:SmallDriveSprocket.fcstd: Difference between revisions
Jump to navigation
Jump to search
Calligarov (talk | contribs) No edit summary |
Calligarov (talk | contribs) No edit summary |
||
| Line 1: | Line 1: | ||
=Notes= | |||
Drawn using OpenSCAD, [[Sprocket Generator]] and considering [[File:ShaftSprocketCoupler.fcstd]]. OpenSCAD code: | |||
difference(){ | |||
sprocket(7,19.05,31.75,17.58,0); | |||
cylinder(r=25.4,h=17.58); | |||
} | |||
Note also that the OD is 3.35". Using the sprocket generator it's not possible to draw it with the correct OD | |||
=For BOM= | |||
https://www.usarollerchain.com/100A7-Sprocket-A-Plate-100A7-Sprocket-p/100a7-sprocket.htm | |||
Revision as of 16:23, 27 March 2021
Notes
Drawn using OpenSCAD, Sprocket Generator and considering File:ShaftSprocketCoupler.fcstd. OpenSCAD code:
difference(){
sprocket(7,19.05,31.75,17.58,0);
cylinder(r=25.4,h=17.58);
}
Note also that the OD is 3.35". Using the sprocket generator it's not possible to draw it with the correct OD
For BOM
https://www.usarollerchain.com/100A7-Sprocket-A-Plate-100A7-Sprocket-p/100a7-sprocket.htm
File history
Click on a date/time to view the file as it appeared at that time.
| Date/Time | Dimensions | User | Comment | |
|---|---|---|---|---|
| current | 11:03, 28 March 2021 | (103 KB) | Calligarov (talk | contribs) | Redrawn to have a bore usable for assemblies |
| 16:11, 27 March 2021 | (63 KB) | Calligarov (talk | contribs) |
You cannot overwrite this file.
File usage
The following page uses this file: