File:17teeth100pitchSprocket.fcstd: Difference between revisions
Jump to navigation
Jump to search
Calligarov (talk | contribs) (=Notes= Drawn using OpenSCAD, Sprocket Generator and considering 1-7/8" shaft. OpenSCAD code (dimensions in mm): sprocket(17,19.05,31.75,17.58,0); Note also that the OD is 7.44". =For BOM= https://www.usarollerchain.com/100A17-Sprocket-A-Plate...) |
(No difference)
|
Latest revision as of 11:59, 27 June 2021
Notes
Drawn using OpenSCAD, Sprocket Generator and considering 1-7/8" shaft. OpenSCAD code (dimensions in mm):
sprocket(17,19.05,31.75,17.58,0);
Note also that the OD is 7.44".
For BOM
https://www.usarollerchain.com/100A17-Sprocket-A-Plate-100A17-Sprocket-p/100a17-sprocket.htm
File history
Click on a date/time to view the file as it appeared at that time.
| Date/Time | Dimensions | User | Comment | |
|---|---|---|---|---|
| current | 11:59, 27 June 2021 | (303 KB) | Calligarov (talk | contribs) | =Notes= Drawn using OpenSCAD, Sprocket Generator and considering 1-7/8" shaft. OpenSCAD code (dimensions in mm): sprocket(17,19.05,31.75,17.58,0); Note also that the OD is 7.44". =For BOM= https://www.usarollerchain.com/100A17-Sprocket-A-Plate... |
You cannot overwrite this file.
File usage
The following page uses this file: