CEB Press v21.06 CAM Files: Difference between revisions
Jump to navigation
Jump to search
(Created page with "*CNC cutting by Seaman and Schuske in St. Joseph *Brian Neal had issues with 5 files from the 1/2" steel in the set, they were scaled up 25.4x on his end. *Here they are scale...") |
|||
(One intermediate revision by the same user not shown) | |||
Line 2: | Line 2: | ||
*Brian Neal had issues with 5 files from the 1/2" steel in the set, they were scaled up 25.4x on his end. | *Brian Neal had issues with 5 files from the 1/2" steel in the set, they were scaled up 25.4x on his end. | ||
*Here they are scaled down 25.4x. [[File:5 scaled half inch steel.zip]] | *Here they are scaled down 25.4x. [[File:5 scaled half inch steel.zip]] | ||
=CAM= | |||
Note that local cutter, Seaman and Schuske, likes to have individual file parts. | |||
Verification: | |||
<html> <iframe src="https://docs.google.com/presentation/d/e/2PACX-1vTxNfDpWlcowNG_jXo7ItT9LAk2otMUhXatuWb00FVsOPXfDxD6QTjwDtb4Mjmc7y0JalItpyOfn22D/embed?start=false&loop=false&delayms=3000" frameborder="0" width="480" height="389" allowfullscreen="true" mozallowfullscreen="true" webkitallowfullscreen="true"></iframe> </html> | |||
[https://docs.google.com/presentation/d/1jCfTRshCzBx_WteHGsLP4q4wqixKOtxjIdvXQ1vc7yk/edit#slide=id.gb328b2d63d_0_9 edit] | |||
1/8" and 1/4" were ok, gave up on the 1/2" verification, and istead sent the individual files and their number: | |||
#1-1.dxf - quantity of 2 | |||
#1-3.dxf - quantity of 4 | |||
#1-7.dxf - quantity of 2 | |||
#1-9.dxf - quantity of 1 | |||
#1-10.dxf - quantity of 8 | |||
#1-18.dxf - quantity of 2 | |||
#1-20.dxf - quantity of 1 | |||
#1-21.dxf - quantity of 2 | |||
#1-23.dxf - quantity of 2 | |||
#1-25.dxf - quantity of 1 | |||
#1-26.dxf - quantity of 4 | |||
#1-30.dxf - quantity of 2 | |||
#1-32.dxf - quantity of 2 | |||
#1-34.dxf - quantity of 2 | |||
#1-36.dxf - quantity of 2 | |||
#1-38.dxf - quantity of 6 | |||
#1-44.dxf - quantity of 2 | |||
#1-46.dxf - quantity of 4 | |||
#1-50.dxf - quantity of 6 | |||
#2-1.dxf - quantity of 2 | |||
#2-3.dxf - quantity of 2 | |||
#2-5.dxf - quantity of 2 | |||
#2-7.dxf - quantity of 1 | |||
#2-8.dxf - quantity of 1 | |||
#2-9.dxf - quantity of 2 | |||
#2-11.dxf - quantity of 4 | |||
#2-15.dxf - quantity of 3 | |||
#2-18.dxf - quantity of 2 | |||
#2-20.dxf - quantity of 1 | |||
#2-21.dxf - quantity of 1 | |||
#2-22.dxf - quantity of 1 | |||
=CNC Cut Files= | |||
*Master CAM File - '''[[File:CEB_v1708_CAM.zip]]'''. | |||
:*There are pieces cut from eighth inch steel, quarter inch steel, and half inch steel - marked accordingly | |||
:*Broken line in 1/8" material is a bend line, which means it should also be cut. | |||
:*Numbers in brackets refer to the quantities | |||
:*Nesting in CAM file is on a 4'x8' sheet of steel - as a reference on the absolute size of the parts. | |||
*Steel order from Seaman and Schuske for only the 1/2" steel plate from 2017- nested onto 5x10 foot steel- [[File:seamanandschuske.zip]] | |||
*Scaled individual 1/2" steel files on Gitlab [https://gitlab.com/marcin_ose/ceb-press-v21.06/-/blob/main/Seaman_5x10_Individual_Files_scaled.zip] |
Latest revision as of 18:13, 28 June 2021
- CNC cutting by Seaman and Schuske in St. Joseph
- Brian Neal had issues with 5 files from the 1/2" steel in the set, they were scaled up 25.4x on his end.
- Here they are scaled down 25.4x. File:5 scaled half inch steel.zip
CAM
Note that local cutter, Seaman and Schuske, likes to have individual file parts.
Verification:
1/8" and 1/4" were ok, gave up on the 1/2" verification, and istead sent the individual files and their number:
- 1-1.dxf - quantity of 2
- 1-3.dxf - quantity of 4
- 1-7.dxf - quantity of 2
- 1-9.dxf - quantity of 1
- 1-10.dxf - quantity of 8
- 1-18.dxf - quantity of 2
- 1-20.dxf - quantity of 1
- 1-21.dxf - quantity of 2
- 1-23.dxf - quantity of 2
- 1-25.dxf - quantity of 1
- 1-26.dxf - quantity of 4
- 1-30.dxf - quantity of 2
- 1-32.dxf - quantity of 2
- 1-34.dxf - quantity of 2
- 1-36.dxf - quantity of 2
- 1-38.dxf - quantity of 6
- 1-44.dxf - quantity of 2
- 1-46.dxf - quantity of 4
- 1-50.dxf - quantity of 6
- 2-1.dxf - quantity of 2
- 2-3.dxf - quantity of 2
- 2-5.dxf - quantity of 2
- 2-7.dxf - quantity of 1
- 2-8.dxf - quantity of 1
- 2-9.dxf - quantity of 2
- 2-11.dxf - quantity of 4
- 2-15.dxf - quantity of 3
- 2-18.dxf - quantity of 2
- 2-20.dxf - quantity of 1
- 2-21.dxf - quantity of 1
- 2-22.dxf - quantity of 1
CNC Cut Files
- Master CAM File - File:CEB v1708 CAM.zip.
- There are pieces cut from eighth inch steel, quarter inch steel, and half inch steel - marked accordingly
- Broken line in 1/8" material is a bend line, which means it should also be cut.
- Numbers in brackets refer to the quantities
- Nesting in CAM file is on a 4'x8' sheet of steel - as a reference on the absolute size of the parts.
- Steel order from Seaman and Schuske for only the 1/2" steel plate from 2017- nested onto 5x10 foot steel- File:Seamanandschuske.zip
- Scaled individual 1/2" steel files on Gitlab [1]