CEB Press v21.06 CAM Files

• CNC cutting by Seaman and Schuske in St. Joseph
• Brian Neal had issues with 5 files from the 1/2" steel in the set, they were scaled up 25.4x on his end.
• Here they are scaled down 25.4x. File:5 scaled half inch steel.zip

CAM

Note that local cutter, Seaman and Schuske, likes to have individual file parts.

Verification:

edit

1/8" and 1/4" were ok, gave up on the 1/2" verification, and istead sent the individual files and their number:

1. 1-1.dxf - quantity of 2
2. 1-3.dxf - quantity of 4
3. 1-7.dxf - quantity of 2
4. 1-9.dxf - quantity of 1
5. 1-10.dxf - quantity of 8
6. 1-18.dxf - quantity of 2
7. 1-20.dxf - quantity of 1
8. 1-21.dxf - quantity of 2
9. 1-23.dxf - quantity of 2
10. 1-25.dxf - quantity of 1
11. 1-26.dxf - quantity of 4
12. 1-30.dxf - quantity of 2
13. 1-32.dxf - quantity of 2
14. 1-34.dxf - quantity of 2
15. 1-36.dxf - quantity of 2
16. 1-38.dxf - quantity of 6
17. 1-44.dxf - quantity of 2
18. 1-46.dxf - quantity of 4
19. 1-50.dxf - quantity of 6
20. 2-1.dxf - quantity of 2
21. 2-3.dxf - quantity of 2
22. 2-5.dxf - quantity of 2
23. 2-7.dxf - quantity of 1
24. 2-8.dxf - quantity of 1
25. 2-9.dxf - quantity of 2
26. 2-11.dxf - quantity of 4
27. 2-15.dxf - quantity of 3
28. 2-18.dxf - quantity of 2
29. 2-20.dxf - quantity of 1
30. 2-21.dxf - quantity of 1
31. 2-22.dxf - quantity of 1

CNC Cut Files

• Master CAM File - File:CEB v1708 CAM.zip.

• There are pieces cut from eighth inch steel, quarter inch steel, and half inch steel - marked accordingly
• Broken line in 1/8" material is a bend line, which means it should also be cut.
• Numbers in brackets refer to the quantities
• Nesting in CAM file is on a 4'x8' sheet of steel - as a reference on the absolute size of the parts.

• Steel order from Seaman and Schuske for only the 1/2" steel plate from 2017- nested onto 5x10 foot steel- File:Seamanandschuske.zip
• Scaled individual 1/2" steel files on Gitlab [1]