Neal Log: Difference between revisions
No edit summary |
|||
| (One intermediate revision by the same user not shown) | |||
| Line 6: | Line 6: | ||
Redesigned the mounts on the Y on X axis to remove the hex slot to allow for tools to screw it in. I also did the same to holes in the Y carriages to mount the Z axis. Parts will need to be redesigned to be more uniform with this slotting and to remove excess. | Redesigned the mounts on the Y on X axis to remove the hex slot to allow for tools to screw it in. I also did the same to holes in the Y carriages to mount the Z axis. Parts will need to be redesigned to be more uniform with this slotting and to remove excess. | ||
[[file:Torch_table_assembly_v21_08_v4_1.png|150px]] | |||
[[file:Torch_table_assembly_v21_08_v4_2.png|150px]] | |||
[[file:Torch_table_assembly_v21_08_v4_3.png|150px]] | |||
[[file:Torch_table_assembly_v21_08_v4_4.png|150px]] | |||
https://github.com/AmunRa1322/OpenSourceEcology_Files/blob/main/Torch_table_assembly_v21_08_v4.FCStd | https://github.com/AmunRa1322/OpenSourceEcology_Files/blob/main/Torch_table_assembly_v21_08_v4.FCStd | ||
Latest revision as of 02:35, 11 August 2021
Tue Aug 10, 2021
Redesigned the mounts on the Y on X axis to remove the hex slot to allow for tools to screw it in. I also did the same to holes in the Y carriages to mount the Z axis. Parts will need to be redesigned to be more uniform with this slotting and to remove excess.
https://github.com/AmunRa1322/OpenSourceEcology_Files/blob/main/Torch_table_assembly_v21_08_v4.FCStd
Sat Aug 7, 2021
Came up with one possible solution to mount Y axis to X carriage by printing the end pieces with an extruded part on top and bottom with a bolt cavity. This would align with one of the assembly bolts of the carriage and would be replaced by a longer one that holds all three pieces together.
https://github.com/AmunRa1322/OpenSourceEcology_Files/blob/main/Torch_table_assembly_v21_08_v3.FCStd
Sun Aug 1, 2021
Spent around 4 hours designing the CNC torch table to have the proper head in design, lower the Y axis and have double X axis design. https://github.com/AmunRa1322/OpenSourceEcology_Files/blob/main/Torch_table_assembly_v21_08.FCStd
Sat Jul 31, 2021
Worked about 4 hours on FreeCAD assembling the base tractor frame. https://github.com/AmunRa1322/OpenSourceEcology_Files/blob/main/Tractor_Platform.v2.FCStd
Fri Jul 30, 2021
Badge - please answer questions regarding time to learn - i put 2 hours as a guess.
Embed this video on your Work Log. Send an email to info at opensourceecology.org letting us know, with a link to your log. Please also answer the following questions to help us learn how to teach FreeCAD more effectively:
What were the videos that you studied to learn FreeCAD? Please include links.
The videos in 101 and some Googling on how to do certain things.
Was Lesson 3A and 3B from FreeCAD 101 sufficient? How could we improve the lessons so you can get the FreeCAD Badge faster? The lessons were sufficient to receive the badge but showing how to assemble different parts would be nice. Also, not sure if it would make sense but loading the OSE part libraries into the OSE Linux would be nice.
How long did it take you to install FreeCAD 16?
Already installed in the OSE Linux but took a few minutes on Windows.
How long did it take you to learn the skill to perform the Feature-on-a-Feature Exercise?
About an hour to go from zero to do feature on feature.