CNC Torch Table v21.08 Data Collection: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
| Line 1: | Line 1: | ||
=Alignment= | |||
=Motion Force= | |||
*At half inch cutting speeds of 20 ipm or 500 mm/min - this is prior to pulley size calibration of about 30% larger pulley | |||
*11/12/21 gets us 25 lb towards negative y1, 20+ for both directions of y2, and 20+ lb for both directions of x | |||
*Positive y1 | |||
=Speeds Achievable= | |||
*11/12/21 gets us to 3000 mm/min. Above starts to skip. | |||
=More= | |||
*Actual initial speed prior to calibration. - 1m/2min = or 0.5 m/min or 20 IPM | *Actual initial speed prior to calibration. - 1m/2min = or 0.5 m/min or 20 IPM | ||
*889 Y limit | *889 Y limit | ||
Revision as of 19:22, 12 November 2021
Alignment
Motion Force
- At half inch cutting speeds of 20 ipm or 500 mm/min - this is prior to pulley size calibration of about 30% larger pulley
- 11/12/21 gets us 25 lb towards negative y1, 20+ for both directions of y2, and 20+ lb for both directions of x
- Positive y1
Speeds Achievable
- 11/12/21 gets us to 3000 mm/min. Above starts to skip.
More
- Actual initial speed prior to calibration. - 1m/2min = or 0.5 m/min or 20 IPM
- 889 Y limit
- actual motion 26.5 in = 673 mm
- 63.5/80*889=