Narrow-Gauge Rail: Difference between revisions
Jump to navigation
Jump to search
(Added some more information) |
(Added some more information) |
||
| Line 5: | Line 5: | ||
=Existing Designs= | =Existing Designs= | ||
== [[Way Out West with Sandra and Tim]] 's Design== | == [[Way Out West with Sandra and Tim]] 's Design== | ||
===Backround=== | |||
*As show in [[https://youtu.be/c1d3tyQgYxE This Video]] their area in Ireland gets ''VERY'' muddy, so Wheelbarrows/Tractors/Trucks (at least on an unprepared surface) would tear it up | |||
*Also as shown in ]https://youtu.be/y8Kc5_HXtSM This Video] they seem to mainly use it for hauling bulk supplies such as wood in their Logging / Forestry Debris -> [[Poly Drying Tunnel]] -> Firewood / Charcoal workflow | |||
**Each wagon seemed to hold ~20 [[Baker's Trays]] worth of chopped up sticks (akin to pruning debris) | |||
===Sleeper Based=== | ===Sleeper Based=== | ||
*[https://www.youtube.com/watch?v=HWBRKeR8IvY A Video Showcasing the Basic Rail] | *[https://www.youtube.com/watch?v=HWBRKeR8IvY A Video Showcasing the Basic Rail] | ||
Revision as of 03:54, 17 January 2022
Basics
- A Railway using a Track Gauge of less than 381 mm (15 in) (For Reference a Standard-Gauge Railway is 1,435 mm (4 ft 8+1⁄2 in) ) )
- Used mainly as a replacement for Wheelbarrows and/or Trucks
Existing Designs
Way Out West with Sandra and Tim 's Design
Backround
- As show in [This Video] their area in Ireland gets VERY muddy, so Wheelbarrows/Tractors/Trucks (at least on an unprepared surface) would tear it up
- Also as shown in ]https://youtu.be/y8Kc5_HXtSM This Video] they seem to mainly use it for hauling bulk supplies such as wood in their Logging / Forestry Debris -> Poly Drying Tunnel -> Firewood / Charcoal workflow
- Each wagon seemed to hold ~20 Baker's Trays worth of chopped up sticks (akin to pruning debris)
Sleeper Based
- A Video Showcasing the Basic Rail
- 15 Inch Gauge Track
- Utilizes 50mmx8mm Bar Stock (2 inch x 3/8 inch)
- Galvanized Steel Pile with a 6mm hole near the top
- Two holes in each Rail Sleeper (each with one of the aforementioned pipes going into it)
- 6mm Gutter Bolt + nut used to hold rails onto pipe
- Wheels utilizing 8 Inch Steel Pipe and CNC Plasma Torch Table cut wheel inserts and flanges
- Flanges are hand formed from a cut arc into a ring, then welded in place
Sleeper-less / Slab Railway
- "Angle Iron Set in Concrete" (A Timecode from A Video by the YouTube Channel "Way Out West with Sandra and Tim" Titled "Making a Turn-Table For a 15” Narrow-Gauge Railway" )