Latest revision as of 03:44, 2 March 2022

Suck-In

To suck in one member against an attachment surface, predrill the member the same size as lag bolt size. The surface is predrilled with a smaller hole. This way, the bolt slides in the hole in the member, sucking it in to the attachment surface.

From [1]:

@@ Line 1: / Line 1: @@
+=Suck-In=
+*To suck in one member against an attachment surface, predrill the member the same size as lag bolt size. The surface is predrilled with a smaller hole. This way, the bolt slides in the hole in the member, sucking it in to the attachment surface.
+=Predrill Hole Size=
+From [https://www.google.com/search?sxsrf=ALeKk026QG9BbsZl0rNsBS9KmerMgczY_w%3A1602863734253&source=hp&ei=dsKJX6q8DJDYsAXHkpG4Cw&q=predrill+chart+for+lag+bolts&btnK=Google+Search&oq=how+to+configure+nvidia+geforce+gtx+1650+super+on+linux+mint&gs_lcp=CgZwc3ktYWIQAzIFCCEQoAEyBQghEKsCMgUIIRCrAjoOCAAQ6gIQtAIQmgEQ5QI6DgguELEDEMcBEKMCEJMCOggILhDHARCvAToLCC4QsQMQxwEQowI6CAgAELEDEIMBOggILhCxAxCDAToFCAAQsQM6AggAOgQIABAKOgYIABAWEB46CAghEBYQHRAeOgcIIRAKEKABUMsQWOmzAWD8tAFoBnAAeACAAeQGiAGhS5IBDTExLjQ3LjMuMi42LTGYAQCgAQGqAQdnd3Mtd2l6sAEG&sclient=psy-ab&ved=0ahUKEwiqz4DcvLnsAhUQLKwKHUdJBLcQ4dUDCAk&uact=5]:
+*For 1/2" bolts- 1/4". Softwood assumed.
+*3/8" bolts - 11/64" predrill
 =Pull-Out=
 *Strengh is 450 lb per inch of thread in southern pine - [https://www.zillarac.com/Portals/0/Documents/PDF/Screw%20Pull-out.pdf]