3D Printer Tuning: Difference between revisions
Jump to navigation
Jump to search
(Created page with "<html><iframe src="https://docs.google.com/presentation/d/1FtM_tWyv285XzFLvQ1FkUq5w4OmRK-4OhoIShDJLij0/embed?start=false&loop=false&delayms=3000" frameborder="0" width="960" h...") |
(→Links) |
||
| (7 intermediate revisions by the same user not shown) | |||
| Line 1: | Line 1: | ||
=First Layer Adhesion Calibration= | |||
*Just do a circle: and test quickly that you are getting first layer properly - by observing whether first layer is perfectly flat | |||
[[File:circlecalibration.fcstd]]. [[File:circlecalibration.stl]] | |||
*Or do a square: | |||
[[File:squarecalibration.fcstd]]. [[File:squarecalibration.stl]] | |||
=Print Area Testing= | |||
*For an 8" bed - use this 8" square - [[File:8inchsquare.fcstd]]. STL - [[File:8inchsquare.stl]] | |||
*7" square - [[File:7inchsquare.fcstd]]. STL - [[File:7inchsquare.stl]] | |||
=Calibration of Filament and Bed Level= | |||
<html><iframe src="https://docs.google.com/presentation/d/1FtM_tWyv285XzFLvQ1FkUq5w4OmRK-4OhoIShDJLij0/embed?start=false&loop=false&delayms=3000" frameborder="0" width="960" height="569" allowfullscreen="true" mozallowfullscreen="true" webkitallowfullscreen="true"></iframe></html> | <html><iframe src="https://docs.google.com/presentation/d/1FtM_tWyv285XzFLvQ1FkUq5w4OmRK-4OhoIShDJLij0/embed?start=false&loop=false&delayms=3000" frameborder="0" width="960" height="569" allowfullscreen="true" mozallowfullscreen="true" webkitallowfullscreen="true"></iframe></html> | ||
[https://docs.google.com/presentation/d/1FtM_tWyv285XzFLvQ1FkUq5w4OmRK-4OhoIShDJLij0/edit#slide=id.g22c2c623a5_0_0 edit] | [https://docs.google.com/presentation/d/1FtM_tWyv285XzFLvQ1FkUq5w4OmRK-4OhoIShDJLij0/edit#slide=id.g22c2c623a5_0_0 edit] | ||
=Procedure= | |||
<html><iframe src="https://docs.google.com/presentation/d/1wPKjHgCLfAsDWWsu-103jfkKdvwAevAtCI_8U5MXHZc/embed?start=false&loop=false&delayms=3000" frameborder="0" width="960" height="569" allowfullscreen="true" mozallowfullscreen="true" webkitallowfullscreen="true"></iframe></html> | |||
[https://docs.google.com/presentation/d/1wPKjHgCLfAsDWWsu-103jfkKdvwAevAtCI_8U5MXHZc/edit edit] | |||
=Links= | |||
*[[Triffid Hunter's Calibration Guide]] | |||
*[[Autoparallel]] | |||
*[[Frame Design Guide]] | |||
*[[First Run]] | |||
Latest revision as of 18:05, 8 October 2022
First Layer Adhesion Calibration
- Just do a circle: and test quickly that you are getting first layer properly - by observing whether first layer is perfectly flat
File:Circlecalibration.fcstd. File:Circlecalibration.stl
- Or do a square:
File:Squarecalibration.fcstd. File:Squarecalibration.stl
Print Area Testing
- For an 8" bed - use this 8" square - File:8inchsquare.fcstd. STL - File:8inchsquare.stl
- 7" square - File:7inchsquare.fcstd. STL - File:7inchsquare.stl
Calibration of Filament and Bed Level
Procedure