Latest revision as of 17:40, 13 April 2023

Air side up in this mounting - [1]
Some places say upside down matters - [2]. Supplyhouse says it doesn't matter [3].
IT seems it does matter - process connection at top, so that trapped air bubbles can float up and out. [4]. If it's on the side, air can get trapped inside. This makes sense to me. Also - can corrode if it's on the side, or put more stress on the bladder [5].
- Depends on tank. Definitely want to watch the air escape - [6]
Summary: always think of how the air escapes a pressure or expansion tank. This is for hot water system expansion tanks and RO tanks. But, for water storage (cold) tanks - this one indicates that orientation doesn't matter - could be because the cold storage tanks are built more heavy? Water storage tanks have more air - 2/3 air - [7]. Expansion tanks seem to have 1/2 air.
RO tank may work as an expansion tank [8]
Pressure tanks vs expansion tanks [9]

Sourcing

@@ Line 10: / Line 10: @@
 ==Thermal==
 *$30 2 gal 3/4" [https://www.zoro.com/zoro-select-thermal-expansion-tank-steel-8-l-12-h-60022/i/G2553140/?recommended=true]
+*$40 Menards 2 gal 3/4" [https://www.menards.com/main/plumbing/water-heaters/hot-water-storage-tanks/watts-reg-potable-water-expansion-tank/det-5-m1/p-1550129344018-c-8691.htm]
+==Reverse Osmosis==
+*1/2 gal [https://www.freshwatersystems.com/products/pae-ro-105-reverse-osmosis-storage-tank-powder-coated-steel-0-5-gal?variant=13249837596715&c1=GAW_SE_NW&source=PLA_USA_PM&cr2=pmax__-__nw__-__shopping&kw=13249837596715&cr5=pla&cr7=c&utm_term=13249837596715&utm_campaign=pmax__-__nw__-__shopping&utm_source=PLA_USA_PM&utm_medium=cpc&hsa_acc=2014103020&hsa_cam=11853986621&hsa_grp=&hsa_ad=&hsa_src=x&hsa_tgt=&hsa_kw=&hsa_mt=&hsa_net=adwords&hsa_ver=3&gclid=CjwKCAjwitShBhA6EiwAq3RqA5XCbYxu4PhpIjF_nDBsHsqajzWQlcgs2EOfvbCK3iVO1G-pO99TsBoCgSQQAvD_BwE]