SH4 Electrical Part Library: Difference between revisions

From Open Source Ecology
Jump to navigation Jump to search
 
(85 intermediate revisions by 2 users not shown)
Line 1: Line 1:
==Part Library==
=About=
Details of each electrical box are found in individual files. All boxes should be added to Master Electrical, which is missing some. SH_Wiring is the master electrical series with the SEH 4 floor plan.
 
=Part Library=




<gallery perrow=6>
<gallery perrow=6>
File:boxb7+8.png|'''Box B7 and B8.''' Hall wall. - [[File:boxb7+8.fcstd]]
File:masterelectrical.png|'''Master electrical.''' - Gitlab - Version 6 is latest - [https://gitlab.com/opensourceecology.org/SH4/-/blob/main/SH4_Wiring_6.fcstd]. Seems to have more than the Electrical Only file.
 
File:SEH4masterbedroomelectrical.png|'''Master bedroom electrical''' -- -[[File:SEH4masterbedroomelectrical.fcstd]]. Taken to Gitlab [https://gitlab.com/opensourceecology.org/SH4/-/blob/main/Bedroom_Electrial_-_Master_3.fcstd]
 
File:SEH4holehouse.png|'''Whole house.''' - File at Gitlab - [https://gitlab.com/opensourceecology.org/SH4/-/blob/main/SEH_4_071123.fcstd]
 
File:wallmodule67.png|'''Wall Module 67 - Power Center''' Power center pretty much as built - [[File:wallmodule67.fcstd]]. Taken to Gitlab with v21 as latest. [https://gitlab.com/opensourceecology.org/SH4/-/blob/main/power_center_21.fcstd]
 
File:coreutemodules.png|'''Core Utility Modules'''. [[File:coreutilitymodules.fcstd]]
 
File:electricalonly.png|'''Electrical components only''' - [[File:electricalonly.fcstd]]
 
File:meterbasetechdraw.png|'''Meter base tech drawing.''' - [[File:meterbasetechdraw.fcstd]]
 
 
File:tsblocking.png|'''Transfer Switch blocking tech drawing.''' - [[File:tsblocking.fcstd]]
 
File:tsdetail.png|'''Transfer Switch subassembly detail.''' - [[File:tsdetail.fcstd]]
 
File:halflfmcconnector.png|'''1/2" LFMC connector''' - [[File:halflfmcconnector.fcstd]]
 
File:heatpump24000.png|'''24000 BTU Heat Pump.''' - [[File:heatpump24000.fcstd]]
 
File:waterheatercabinet.png|'''Water Heater Cabinet'''. [[File:waterheatercabinet.fcstd]]
 
File:singlesourcebox.png|'''Single Box - Source file.''' Can select N, S, E, W, Up (ceiling) orientation, first stub left or right, and following turn up-down-forward-back - [[File:singlesourcebox.fcstd]].
 
File:fanandlightcavity.png|'''Fan and light cavity.''' Livig room in front of main door.- [[File:fanandlightcavity.fcstd]]
 
File:beadboardwithvent1.png|'''Vent 1 - register + access panel.''' Wall module I29.  - [[File:beadboardwithvent1.fcstd]]
 
 
File:heatpumpdisconnect.png|'''Heat pump disconnect.''' - FreeCAD - [[File:heatpumpdisconnect.FCStd]]
 
File:meterbase.png |'''Meter base.''' FreeCAD -[[File:meterbase.fcstd]]


File:boxb6.png|'''Box B6.''' Hall wall. - [[File:boxb6.fcstd]]
File:subpanel.png |'''Subpanel.''' FreeCAD -[[File:subpanel.fcstd]]


File:boxonlywithwire.png|'''Box for wire length.''' At this point there is 2' of wire - [[File:boxonlywithwire.fcstd]]
File:inverteracindisconnect.png |'''Inverter AC input disconnect.''' 70A box. FreeCAD -[[File:inverteracindisconnect.fcstd]]


File:30AQObox.png |'''30A QO Breaker box.''' FreeCAD -[[File:30AQObox.fcstd]]


File:boxb5.png|'''Box B5.''' Nook wall outlet. - [[File:boxb5.fcstd]]
File:mainbreakerbox.png |'''Main breaker box.''' FreeCAD -[[File:mainbreakerbox.fcstd]]


File:boxb4.png|'''Box B4.''' Light in second living room light closure. - [[File:boxb4.fcstd]]
File:transferswitch.png |'''Transfer Switch.''' FreeCAD -[[File:transferswitch.fcstd]]
File:mareyeco150.png|'''Marey Eco 150 Water Heater''' - [[File:mareyeco150.fcstd]]


File:Heatpump24kbtuindoorunit.png|'''Senville 24000 BTU Indoor Heat Pump Unit.''' Power center details - [[File:Heatpump24kbtuindoorunit.fcstd]]


File:lightclosureendsection.png|'''Light closure end section.''' - For Living Room 2 Closure. [[File:lightclosureendsection.fcstd]]
File:sungoldTP6048.png|'''Inverter.''' - [[File:sungoldTP6048.fcstd]]


File:lightcoversection1.png|'''Ceiling Light Assembly, living room 2.''' Has universal submodules - the first part with fan detail. This file started as Light Cover Section 1, and continued to the full assembly. - FreeCAD -[[File:lightcoversection1.fcstd]].
File:pvdisconnect.png|'''PV disconnect.''' Also heat pump disconnect. - [[File:pvdisconnect.fcstd]]


File:lighcover.png|'''Main living room Light cover.''' - FreeCAD -[[File:lightcover.fcstd]]. Also the end section - [[File:lightclosureendsection.fcstd]]
File:eboxroutingjig.png|'''Electrical box routing jig.''' For 15A router. - [[File:eboxroutingjig.fcstd]]
File:bathfan.png|'''Bathroom Fan''' - FreeCAD - [[File:bathfan.FCStd]]
File:bathfanvent.png|'''Bathroom Fan Vent.''' - FreeCAD - [[File:bathfanvent.FCStd]]
File:bathventassy.png|'''Bathroom Fan Vent assembly.''' - FreeCAD - [[File:bathfanventassy.FCStd]]


File:boxb3.png|'''Bedroom Box B3 and B4''' - FreeCAD -[[File:boxb3.fcstd]].


File:boxb2.png|'''Bedroom box 2''' 179" of 12/2 wire. See map at [https://docs.google.com/presentation/d/1YF44L9WZ75y9LLAr8AwxbeC-K__OKJVt7FZzvzeQQ6Y/edit#slide=id.g1e473a8f3ac_0_73] - FreeCAD -[[File:boxb2.fcstd]]. '''Correction: tech drawing is still relevant, but moved this box to Module 69. Thus, 179" of wire turns to 131" (exactly 48" less).
File:beadboard2nd.png|'''2nd Floor beadboard layer.''' - [[File:beadboard2nd.fcstd]]


File:boxb1.png|'''Bedroom box 1.''' 147" of 12/2 to subpanel. See map at [https://docs.google.com/presentation/d/1YF44L9WZ75y9LLAr8AwxbeC-K__OKJVt7FZzvzeQQ6Y/edit#slide=id.g1e473a8f3ac_0_73] - FreeCAD -[[File:boxb1.fcstd]].


File:subpaneltechdraw.png|'''Subpanel.''' Tech drawing.- FreeCAD -[[File:subpaneltechdraw.fcstd]].


File:acinfinity.png|'''AC infinity register booster fan.''' - FreeCAD -[[File:acinfinity.fcstd]].
File:acinfinity.png|'''AC infinity register booster fan.''' - FreeCAD -[[File:acinfinity.fcstd]].
Line 46: Line 86:


</gallery>
</gallery>
=Boxes=
<gallery perrow=6>
File:check.png|'''Box 10 - Module 20''' - See design doc [https://docs.google.com/presentation/d/1YF44L9WZ75y9LLAr8AwxbeC-K__OKJVt7FZzvzeQQ6Y/edit#slide=id.g2543e17aaa4_0_59]. FreeCAD - [[File:module20.fcstd]]. Wiki page - [[SH 4 Electrical Boxes]]
File:BoxW.png|'''Box W - washer box.''' - [[File:BoxW.fcstd]]
File:modulei5.png|'''Module i5.''' Water heaters module. Box H1, Heater 2 junction, Box DW, and K4 from kitchen circuit. [[File:modulei5.fcstd]]
File:boxL17.png|'''Box L17.''' This is the canopy light. Note L18 and L19 - garage lights - are not documented.- [[File:boxL17.fcstd]]
File:boxL16.png|'''Box L16.''' Contains 2 boxes, because the canopy light needs a switch, and we want a lower level box, too. - [[File:boxL16.fcstd]]
File:boxL15.png|'''Box L15.''' Living room. - [[File:boxL15.fcstd]]
File:boxL14.png|'''Box L14.''' Living room. - [[File:boxL14.fcstd]]
File:boxL13.png|'''Box L13.''' Living room. - [[File:boxL13.fcstd]]
File:boxL12.png|'''Box L12.''' Living room. - [[File:boxL12.fcstd]]
File:boxL10-L11.png|'''Box L10-L11.''' Living room circuit - garage light+door opener. Includes tech drawing in separate file - [[File:boxL10-L11.fcstd]]
File:boxG2.png|'''Box G2.''' Garage circuit. - [[File:boxG2.fcstd]]
File:boxG1.png|'''Box G1.''' Garage circuit. - [[File:boxG1.fcstd]]
File:boxL7.png|'''Box L7-L9.''' Living room. - [[File:boxL7.fcstd]]
File:boxL6.png|'''Box L6.''' Living room. - [[File:boxL6.fcstd]]
File:boxL5.png|'''Box L5.''' Living room. - [[File:boxL5.fcstd]]
File:boxL4.png|'''Box L4.''' Living room. - [[File:boxL4.fcstd]]
File:boxL3.png|'''Box L3.''' Living room. - [[File:boxL3.fcstd]]
File:boxL2.png|'''Box L2.''' Living room. - [[File:boxL2.fcstd]]
File:boxL1.png|'''Box L1.''' Living room. - [[File:boxL1.fcstd]]
File:boxk5.png|'''Box K5''' Kitchen. - [[File:boxk5.fcstd]]
File:boxk4.png|'''Box K4.''' Kitchen. - [[File:boxk4.fcstd]]
File:boxk3.png|'''Box K3.''' Kitchen. - [[File:boxk3.fcstd]]
File:boxk2.png|'''Box K2.''' Kitchen. - [[File:boxk2.fcstd]]
File:boxk1.png|'''Box K1.''' Kitchen. - [[File:boxk1.fcstd]]
File:boxb41-42.png|'''Box B41-42.''' Includes Box BG1 and Box BG2 - the 2 GFCI outlets in the bathrooms - [[File:boxb41-42.fcstd]]
File:boxb39-40.png|'''Box B39-40.''' ______ - [[File:boxb39-40.fcstd]]
File:boxb38.png|'''Box B38.''' ______ - [[File:boxb38.fcstd]]
File:boxb37.png|'''Box B37.''' ______ - [[File:boxb37.fcstd]]
File:boxb36.png|'''Box B36.''' ______ - [[File:boxb36.fcstd]]
File:boxb35.png|'''Box B35.''' Bathroom 2 ceiling light - [[File:boxb35.fcstd]]. Separate file for 2nd penetration in another BB sheet for wire - [[File:Box B35 Penetration 2.fcstd]]
File:boxb34.png|'''Box B34.''' ______ - [[File:boxb34.fcstd]]
File:boxb33.png|'''Box B33.''' ______ - [[File:boxb33.fcstd]]
2
File:boxb32.png|'''Box B32.''' Outlet to hood vent. Includes B32 (20 ci box) and B32B - junction box in vent hood - [[File:boxb32.fcstd]]
File:boxb31.png|'''Box B31.''' ______ - [[File:boxb31.fcstd]]
File:boxb30.png|'''Box B30.''' ______ - [[File:boxb30.fcstd]]
File:boxb29.png|'''Box B29.''' ______ - [[File:boxb29.fcstd]]
File:boxb28.png|'''Box B28.''' ______ - [[File:boxb28.fcstd]]
File:boxb26-27.png|'''Box B26-B27.''' ______ - [[File:boxb26-b27.fcstd]]
File:boxb25.png|'''Box B25.''' ______ - [[File:boxb25.fcstd]]
File:boxb24.png|'''Box B24.''' ______ - [[File:boxb24.fcstd]]
File:boxb21.png|'''Box B21.''' Includes B21-23 - [[File:boxb21.fcstd]]
File:boxb19.png|'''Box B19.''' Main living room light closure, Includes Box B20. [[File:boxb19.fcstd]]
File:boxb18.png|'''Box B18.''' Includes Box B17. - [[File:boxb18.fcstd]]
File:boxb16.png|'''Box B16.''' ______ - [[File:boxb16.fcstd]]
File:boxb15.png|'''Box B15.''' ______ - [[File:boxb15.fcstd]]
File:boxb14.png|'''Box B14.''' __________ - [[File:boxb14.fcstd]]
File:boxb13.png|'''Box B13.''' - [[File:boxb13.fcstd]]
File:boxb11b12.png|'''Box B11-B12.''' - [[File:boxb11b12.fcstd]]
File:boxb10.png|'''Box B10.'''  - [[File:boxb10.fcstd]]
File:boxb9.png|'''Box B9.''' Hall wall 2. - [[File:boxb9.fcstd]]
File:boxb7+8.png|'''Box B7 and B8.''' Hall wall. - [[File:boxb7+8.fcstd]]
File:boxb6.png|'''Box B6.''' Hall wall. - [[File:boxb6.fcstd]]
File:boxonlywithwire.png|'''Box for wire length.''' At this point there is 2' of wire - [[File:boxonlywithwire.fcstd]]
File:boxb5.png|'''Box B5.''' Nook wall outlet. - [[File:boxb5.fcstd]]
File:boxb4.png|'''Box B4.''' Light in second living room light closure. - [[File:boxb4.fcstd]]
File:lightclosureendsection.png|'''Light closure end section.''' - For Living Room 2 Closure. [[File:lightclosureendsection.fcstd]]
File:lightcoversection1.png|'''Ceiling Light Assembly, living room 2.''' Has universal submodules - the first part with fan detail. This file started as Light Cover Section 1, and continued to the full assembly.  - FreeCAD -[[File:lightcoversection1.fcstd]].
File:lighcover.png|'''Main living room Light cover - living room 1 (Front of Main door).'''  - FreeCAD -[[File:lightcover.fcstd]]. Also the end section with insulation stop- [[File:lightclosureendsection.fcstd]]
File:boxb3.png|'''Bedroom Box B3 and B4'''. Second living room light closure, by door to garage. - FreeCAD -[[File:boxb3.fcstd]].
File:boxb2.png|'''Bedroom box 2''' 179" of 12/2 wire. See map at [https://docs.google.com/presentation/d/1YF44L9WZ75y9LLAr8AwxbeC-K__OKJVt7FZzvzeQQ6Y/edit#slide=id.g1e473a8f3ac_0_73] - FreeCAD -[[File:boxb2.fcstd]]. '''Correction: tech drawing is still relevant, but moved this box to Module 69. Thus, 179" of wire turns to 131" (exactly 48" less).
File:boxb1.png|'''Bedroom box 1.''' 147" of 12/2 to subpanel. See map at [https://docs.google.com/presentation/d/1YF44L9WZ75y9LLAr8AwxbeC-K__OKJVt7FZzvzeQQ6Y/edit#slide=id.g1e473a8f3ac_0_73] - FreeCAD -[[File:boxb1.fcstd]].
File:subpaneltechdraw.png|'''Subpanel.''' Tech drawing.- FreeCAD -[[File:subpaneltechdraw.fcstd]].
</gallery>
=Repositories=
*Heyco, by PennEngineering which does fasteners.
**Electrical fittings - PVC adapters - [https://www.heyco.com/Liquid_Tight_Conduit_Fittings/product.cfm?product=Nylon-Conduit-Fittings-Straight-Thru&section=Liquid_Tight_Conduit_Fittings].
**LFMC adapters - 1/2" LFMC 560k STEP [https://www.product-config.net/catalog3/d/heyco/?c=products&id=heyco-9794]
**Tubing mount clips - [https://www.heyco.com/Liquid_Tight_Conduit_Fittings/product.cfm?product=Nylon-Conduit-Mounting-Clips&section=Liquid_Tight_Conduit_Fittings]
*McMaster
**1/2" LFMC - [https://www.mcmaster.com/7119K72/]
**1.25" FMC [https://www.mcmaster.com/7119K75/]
**2" rigid pvc conduit adapter [https://www.mcmaster.com/7945K36/]
**3" conduit clamp [https://www.mcmaster.com/products/conduit-clamps/routing-clamps-8/]. 1/2" conduit clamp [https://www.mcmaster.com/3039T14/]
*1/2" rigid conduit adapter [https://www.mcmaster.com/7945K31/]
*Grainger - has 3" expansion coupling - [https://www.grainger.com/product/CANTEX-Expansion-Conduit-Coupling-4FYA1]


=Fridge Circuit=
=Fridge Circuit=
Line 60: Line 235:


*See also SH2 library - [[SEH 2 Electrical Design]]
*See also SH2 library - [[SEH 2 Electrical Design]]
[[Category: Seed Eco-Home]]

Latest revision as of 04:49, 11 May 2024

About

Details of each electrical box are found in individual files. All boxes should be added to Master Electrical, which is missing some. SH_Wiring is the master electrical series with the SEH 4 floor plan.

Part Library

Boxes

Repositories

  • Heyco, by PennEngineering which does fasteners.
    • Electrical fittings - PVC adapters - [11].
    • LFMC adapters - 1/2" LFMC 560k STEP [12]
    • Tubing mount clips - [13]
  • McMaster
    • 1/2" LFMC - [14]
    • 1.25" FMC [15]
    • 2" rigid pvc conduit adapter [16]
    • 3" conduit clamp [17]. 1/2" conduit clamp [18]
  • 1/2" rigid conduit adapter [19]
  • Grainger - has 3" expansion coupling - [20]

Fridge Circuit

  • Note - boxes are 2.3"x3.75" for the cutout. Boxes slightly under this. CAD here has 2.25 and 4 inches.
  • File:Box36.fcstd - main fridge, left side forward corner of house looking from the front. Tech drawing is looking from inside the house.
  • File:Box37.fcstd
  • File:Box38.fcstd

Living Room


Links

Retrieved from "https://wiki.opensourceecology.org/index.php?title=SH4_Electrical_Part_Library&oldid=296472"