Steam Engine Build/Cylinder Liner Modifications: Difference between revisions
Jump to navigation
Jump to search
(Created page with "{{Category=Steam Engine}} =Description= =Drawing= =Instructions= Cylinder clearance is 0.250". We will use 3.6" from T.D.C as the left edge of the exhaust holes, which shall ...") |
(No difference)
|
Revision as of 01:35, 29 May 2011
Main > Energy > Steam Engine
Description
Drawing
Instructions
Cylinder clearance is 0.250". We will use 3.6" from T.D.C as the left edge of the exhaust holes, which shall be 0.25" in diameter. As such, the exhaust holes are centered at 3.975" from the cylinder head.