Honda GX200 Engine: Difference between revisions
Jump to navigation
Jump to search
(Added some more information) |
(Saved My Progress Mid Long Edit) |
||
| Line 41: | Line 41: | ||
**DRY WEIGHT | **DRY WEIGHT | ||
***16.1 kg | ***16.1 kg | ||
=Potential Modifications= | |||
==New Frame / Fuel Tank etc== | |||
*Mainly making it into a [[Powercube]] | |||
*Could also in theory make it into a generator cart type thing, or a generator in a hush box | |||
==New Air Intake== | |||
*Uncertain how much it would help, but could use a [[Cold Air Intake]] type thing | |||
==Fuel Injection== | |||
*Would need an [[Open Source ECU]] , a new [[Wire Harness]] , a Fuel Pump/Rail, and the nozzles (probably plus either drilled+tapped holes, or a custom milled/cast cylinder head | |||
*[[Port Injection]], [[Direct Injection]] , or [[Dual Injection]] | |||
==New Piston== | |||
*Could have it [[DLC Coated]] (also potentially WPC treatment etc) | |||
*Could REALLY benefit if you also used a [[3D Printed Internal Combustion Engine Piston]] | |||
==New Valv s== | |||
=Internal Links= | =Internal Links= | ||
Revision as of 22:30, 15 October 2024
Basics
- A (Series of?) Single Cylinder Spark Ignition Engine(s) by Honda
- Stock are Gasoline, need to see if stock Propane / Autogas etc exist
- Commonly used for Gas Powered Pumps , Gas Powered Pressure Washers etc
Stock Specifications
- Carbureted
- OHV Based
- Automatic decompression system (releases valves for the hand pull cord “spin up” to make it easier (if i understand correctly), not as essential as in small diesel engines but neat regardless
- Quote from the EU Site:
- 4 stroke single cylinder
- OHV petrol engine
- 25° inclined cylinder horizontal shaft
- CYLINDER SLEEVE TYPE:
- Cast iron sleeve
- BORE X STROKE:
- 68 x 54 mm
- DISPLACEMENT:
- 196 cm³
- COMPRESSION RATIO:
- 8.5 : 1
- NET POWER
- 4.3 kW ( 5.8 HP ) / 3600 rpm
- CONT. RATED POWER
- 3.3 kW ( 4.4 HP ) / 3000 rpm
- 3.7 kW ( 5.0 HP ) / 3600 rpm
- MAX. NET TORQUE
- 12.4 Nm ( 1.26 kgfm ) / 2500 rpm
- IGNITION SYSTEM
- Transistorised
- STARTER
- Recoil (el. start optional)
- FUEL TANK CAPACITY
- 3.1 Liter
- FUEL CONS. AT CONT. RATED POWER
- 1.7 L/h - 3600 rpm
- ENGINE OIL CAPACITY
- 0.6 Liter
- DIMENSIONS (L X W X H)
- 321 x 376 x 346 mm
- DRY WEIGHT
- 16.1 kg
Potential Modifications
New Frame / Fuel Tank etc
- Mainly making it into a Powercube
- Could also in theory make it into a generator cart type thing, or a generator in a hush box
New Air Intake
- Uncertain how much it would help, but could use a Cold Air Intake type thing
Fuel Injection
- Would need an Open Source ECU , a new Wire Harness , a Fuel Pump/Rail, and the nozzles (probably plus either drilled+tapped holes, or a custom milled/cast cylinder head
- Port Injection, Direct Injection , or Dual Injection
New Piston
- Could have it DLC Coated (also potentially WPC treatment etc)
- Could REALLY benefit if you also used a 3D Printed Internal Combustion Engine Piston