Steam Engine Build/Cylinder Mounting Bracket: Difference between revisions
Jump to navigation
Jump to search
(Created page with "{{Category=Steam Engine}} Steam Engine Build Instructions =Description= The cylinder mounting bracket fastens the valve end of the steam engine to the base plate. =Drawing...") |
(No difference)
|
Latest revision as of 02:17, 11 June 2011
Main > Energy > Steam Engine
Steam Engine Build Instructions
Description
The cylinder mounting bracket fastens the valve end of the steam engine to the base plate.
Drawing
Instructions
Using half inch steel plate:
- Cut a rectangle 2.0" wide by 8.5" long.
- Drill two 0.5" dia holes 1.0" from each end at 0.5" from the edge.
- Cut a second rectangle 1.0" wide by 8.5" long.
- Drill two 0.5" dia holes 2.0" from each end at 0.5" from the edge.
- Weld pieces together.