Quick DXF to G-Code Conversion Instructions: Difference between revisions
Jump to navigation
Jump to search
(Created page with "Under Coordinates, set all start at and Z values to 0, G1 feed Z-direction 150, G1 feed xy direction - 10. This works well for 1/2" steel plate. Under File Beg. & End - change G...") |
(No difference)
|
Revision as of 01:06, 15 June 2011
Under Coordinates, set all start at and Z values to 0, G1 feed Z-direction 150, G1 feed xy direction - 10. This works well for 1/2" steel plate.
Under File Beg. & End - change G21 to G20 for inch units.
Import DXF, then export G-Code.
Keep your DXF in the (x,y) > (0,0) coordinate quadrant.