Main Cylinder Top/2nd Cyl Bottom Mounts: Difference between revisions
Jump to navigation
Jump to search
(Created page with "*Cut 6x12x1/2" plate *Drill 4 holes on 2 pin holes on each plate *Weld 1" drilled out nut onto plates *Bolt to arms Category:Fabrication Procedures") |
(No difference)
|
Revision as of 01:24, 19 June 2011
- Cut 6x12x1/2" plate
- Drill 4 holes on 2 pin holes on each plate
- Weld 1" drilled out nut onto plates
- Bolt to arms