Mount Wheels: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
| Line 2: | Line 2: | ||
*Download CAM files for wheel plates -[http://openpario.mime.oregonstate.edu/documents/1237] | *Download CAM files for wheel plates -[http://openpario.mime.oregonstate.edu/documents/1237] | ||
*Configure LinuxCNC | *Configure LinuxCNC | ||
*Torch out plates (or cut by hand) | *[4] Torch out plates (or cut by hand) | ||
*Grind and ream | *Grind and ream | ||
*Weld 9/16"x2" bolts onto back of plate with wheel providing pattern | *[8] Weld 9/16"x2" bolts onto back of plate with wheel providing pattern | ||
**Put wheel on ground | **[4] Put wheel on ground | ||
**Place plate on top of wheel | **[4] Place plate on top of wheel | ||
**Stick bolts in holes and align | **[8] Stick bolts in holes and align | ||
**Weld bolt heads to wheel plate. | **[8] Weld bolt heads to wheel plate. | ||
*Cut gussets - right angle triangles with 4" legs - 4 per wheel | *Cut gussets - right angle triangles with 4" legs - 4 per wheel | ||
*Weld collar onto wheel plate | *Weld collar onto wheel plate | ||
Revision as of 06:07, 19 June 2011
- Prepare wheel mounting plates, 4 per tractor - 1/2"x8"x10"
- Download CAM files for wheel plates -[1]
- Configure LinuxCNC
- [4] Torch out plates (or cut by hand)
- Grind and ream
- [8] Weld 9/16"x2" bolts onto back of plate with wheel providing pattern
- [4] Put wheel on ground
- [4] Place plate on top of wheel
- [8] Stick bolts in holes and align
- [8] Weld bolt heads to wheel plate.
- Cut gussets - right angle triangles with 4" legs - 4 per wheel
- Weld collar onto wheel plate
- Weld gussets onto wheel plates
- Bolt wheels on wheel plate with 9/16" teflon lock nuts.