Mount Wheels: Difference between revisions
Jump to navigation
Jump to search
(Created page with "=Wheel Mounting Plates= *Prepare wheel mounting plates, 4 per tractor - 1/2"x8"x10" *Download CAM files for wheel plates -[http://openpario.mime.oregonstate.edu/documents/1237] ...") |
No edit summary |
||
| (5 intermediate revisions by the same user not shown) | |||
| Line 1: | Line 1: | ||
*Prepare wheel mounting plates, 4 per tractor - 1/2"x8"x10" | *Prepare wheel mounting plates, 4 per tractor - 1/2"x8"x10" | ||
*Download CAM files for wheel plates -[http://openpario.mime.oregonstate.edu/documents/1237] | *Download CAM files for wheel plates -[http://openpario.mime.oregonstate.edu/documents/1237] | ||
*Configure LinuxCNC | *Configure LinuxCNC | ||
*Torch out plates (or cut by hand) | *[4] Torch out plates (or cut by hand) | ||
*Grind and ream | |||
*[8] Weld 9/16"x2" bolts onto back of plate with wheel providing pattern | |||
**[4] Put wheel on ground | |||
**[4] Place plate on top of wheel | |||
**[8] Stick bolts in holes and align | |||
**[8] Weld bolt heads to wheel plate. | |||
*Cut gussets - right angle triangles with 4" legs - 4 per wheel | *Cut gussets - right angle triangles with 4" legs - 4 per wheel | ||
*Weld gussets onto plates | *Weld collar onto wheel plate, centered and right angle | ||
**the gussets face to the outside of the wheel for easy access to 3/4" shaft pin. | |||
*Weld gussets onto wheel plates. | |||
*Bolt wheels on wheel plate with 9/16" teflon lock nuts. | |||
[[Category:Fabrication Procedures]] | |||
Latest revision as of 06:08, 19 June 2011
- Prepare wheel mounting plates, 4 per tractor - 1/2"x8"x10"
- Download CAM files for wheel plates -[1]
- Configure LinuxCNC
- [4] Torch out plates (or cut by hand)
- Grind and ream
- [8] Weld 9/16"x2" bolts onto back of plate with wheel providing pattern
- [4] Put wheel on ground
- [4] Place plate on top of wheel
- [8] Stick bolts in holes and align
- [8] Weld bolt heads to wheel plate.
- Cut gussets - right angle triangles with 4" legs - 4 per wheel
- Weld collar onto wheel plate, centered and right angle
- the gussets face to the outside of the wheel for easy access to 3/4" shaft pin.
- Weld gussets onto wheel plates.
- Bolt wheels on wheel plate with 9/16" teflon lock nuts.