Seed Eco-Home 3D Printing Substitutions: Difference between revisions
Jump to navigation
Jump to search
| Line 19: | Line 19: | ||
=Electrical Service Entrance= | =Electrical Service Entrance= | ||
*Boxes are Plasma cut from thin steel or stainless, and folded. Small | *Boxes are Plasma cut from thin steel or stainless, and folded. Small welds are done as needed. | ||
*3D printed insulators are | *3D printed insulators are used | ||
* | *Teminals use CuAl and made from ZnAl alloys? | ||
=Plumbing= | =Plumbing= | ||
Revision as of 07:36, 23 December 2025
For many, UV resistance must be addressed in outdoor environments. Coatings and protection can include:
- UV inhibitors in plastic
- Gravel (roof)
- Physical protection
- Cement coat
- Paint and other UV coat
- Sacrificial material - sufficient thickness
- Metal or wood cladding
- Use in interior or behind walls
Building Materials - Siding
- Drip cap - 2" now used at base of SH6-7 - about 13 sections at $7 or $100 - [1]
- Metal siding closures - about 40 for $60- [2]
- Gutter Clips - 8 in SH7 - $16 - [3]
Electrical
Electrical Service Entrance
- Boxes are Plasma cut from thin steel or stainless, and folded. Small welds are done as needed.
- 3D printed insulators are used
- Teminals use CuAl and made from ZnAl alloys?
Plumbing
Tools
- Dewalt battery - 8 of them per event at $50 - $400 saved based on lifetime design
- Cordless Blower - $15 - [8]
- Cordless heat gun - $40 [9]
- Gunnie - 24 - or $200 [10]