Cut CEB Metal: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
| Line 1: | Line 1: | ||
Cut 10 pieces of [[7/16"x6" heavy u-channel]] (this link should be filled with (1) a technical drawing from a library of any professional CAD package); (2) a real picture of the material, (3) a real picture or video of someone cutting it (all of: abrasive, cold cut, band, plasma, or oxy torch) | Cut 10 pieces of [[7/16"x6" heavy u-channel]] (this link should be filled with (1) a technical drawing from a library of any professional CAD package); (2) a real picture of the material, (3) a real picture or video of someone cutting it (all of: abrasive, cold cut, band, plasma, or oxy torch) | ||
[[Image:3_cebfab.jpg]] | |||
*[4] 21" long - top and bottom of frame | *[4] 21" long - top and bottom of frame | ||
| Line 18: | Line 20: | ||
* - drawer | * - drawer | ||
* - hopper | * - hopper | ||
Revision as of 22:58, 3 July 2011
Cut 10 pieces of 7/16"x6" heavy u-channel (this link should be filled with (1) a technical drawing from a library of any professional CAD package); (2) a real picture of the material, (3) a real picture or video of someone cutting it (all of: abrasive, cold cut, band, plasma, or oxy torch)
- [4] 21" long - top and bottom of frame
- [2] 29" long - mid of frame
- [2] 10" long - compression chamber spacers
- [2] 42" long - frame sides - see Note on CEB Frame Height
- [2] 44" long - frame sides - see Note on CEB Frame Height
- [4] 6' long - arms
- [4] 4' long - legs
- [4] 6" long - 2.5"x3/16" square tubing - feet tubes
- [4] 10"x10"x1/4" flats - feet
- [2] 1/4"x2" angle, 21" long - hopper closure
- [2] 1/4"x2" angle - 7" long - hopper closure tab for cylinder alignment
- [2]
- - drawer
- - hopper
- - hopper supports
- - shaker
- - hopper interface plate
- [2] 3/4" pipe, 1" long - cylinder aligner
- [2] u-channel, 3" - cylinder align