LifeTrac/Three Point Adapter Quick Attach: Difference between revisions
< LifeTrac
Jump to navigation
Jump to search
No edit summary |
|||
(6 intermediate revisions by one other user not shown) | |||
Line 1: | Line 1: | ||
This is an adapter so you can run three point attachment farm equipment on your life trac. | This is an adapter so you can run three point attachment farm equipment on your life trac. | ||
[[Image:3ptqaon.jpg]] | [[Image:3ptqaon.jpg|400px]] | ||
==Materials:== | ==Materials:== | ||
Line 8: | Line 8: | ||
==Fabrication Instructions:== | ==Fabrication Instructions:== | ||
#Weld the basic frame together by making a 25"x14" rectangle with the tubing, with the remaining 10" piece centered in it. | #Weld the basic frame together by making a 25"x14" rectangle with the tubing, with the remaining 10" piece centered in it. | ||
#Weld the 3/8" plate to the proper QA angle (2 1/4" over its length). | #Weld the 3/8" plate to the top of the frame, at the proper QA angle (2 1/4" over its length). | ||
#Place this on the life trac and mark where the eyes need to be welded. | #Place this on the life trac and mark where the eyes need to be welded. | ||
#Weld the eyes to the frame. | #Weld the eyes to the frame. | ||
#Place on the life trac and mark where the holes need to be on the eyes | #Place on the life trac and mark where the holes need to be on the eyes | ||
#Torch the eye holes and clean them up. | #Torch the eye holes and clean them up. |
Latest revision as of 01:51, 22 August 2011
This is an adapter so you can run three point attachment farm equipment on your life trac.
Error creating thumbnail: File missing
Materials:
- 2"x2"x1/4" Tubing- 80" (25" (2) for top and bottom, 10" (3) for verticals)
- 3/8"x4" plate- 25"
- 1/2"x3" plate- 8" (4" (2))
Fabrication Instructions:
- Weld the basic frame together by making a 25"x14" rectangle with the tubing, with the remaining 10" piece centered in it.
- Weld the 3/8" plate to the top of the frame, at the proper QA angle (2 1/4" over its length).
- Place this on the life trac and mark where the eyes need to be welded.
- Weld the eyes to the frame.
- Place on the life trac and mark where the holes need to be on the eyes
- Torch the eye holes and clean them up.