Solar Collector Losses Summary

Introduction

When considering the overall performance of linear slat collectors for a linear Fresnel solar concentrator system oriented in the E-W direction, several losses must be considered. For the case of a 4:1 aspect ratio array, such as a 15 foot wide array that stretches for 60 feet in the E-W direction. For this case, if we use 6" slats, we can fit about 16 slats in this area, or a total of 480 square feet (45 sq meters) of solar intercept. We have about 5 kWhr/day per square meter in Maysville, Missouri - from [1]. We summarize our losses. This includes air mass losses and averages over the seasons - because we are taking empirical data. We are assumining a collector tube with a single layer of insulating glass on the surface.

1. Reflection losses from mirrors - 1%, assuming 99% reflective mirrors - and assuming that 4% reflection from glass is reflected back at the collector tube
2. Edge Lossses - 10% - from Solar_Collector_Calculations#Losses_due_to_edge_effects_only - about if we consider the 6 hours of highest sun during the day, or from 9:30 AM - 2:30 PM
3. Reflection from collector tube glass - 4% loss
4. Radiation losses from collector tube -

Radiation Loss Calculation

Blackbody radiation calculator shows the following losses for a 60' tube:

This takes a 650K optimal collector temperature, with a 2" tube, 20m long. This collector tube area = 2.9 sq meters.

• 30 kW losses mean 2/3 of the incoming 45 kW of solar gain.
• Reduce this by selective coating of emissivity = 0.25 for Solkote, and we get 7.5 kW of radiation loass