User talk:Tom Griffing: Difference between revisions
Tom Griffing (talk | contribs) No edit summary |
Tom Griffing (talk | contribs) No edit summary |
||
| Line 1: | Line 1: | ||
== Suction Hose Sizing == | |||
did u mention that there were some changes made to the lines going to the pump on the power cube? i was thinking that it might be good to change the hydraulic tank design so that the output is on the other side? last time i saw the hose looped around from one side to the other, i wasnt sure if thats what you had tweeked but just throwing the idea into the mix --[[User:Dorkmo|Dorkmo]] 23:50, 30 August 2011 (CEST) | did u mention that there were some changes made to the lines going to the pump on the power cube? i was thinking that it might be good to change the hydraulic tank design so that the output is on the other side? last time i saw the hose looped around from one side to the other, i wasnt sure if thats what you had tweeked but just throwing the idea into the mix --[[User:Dorkmo|Dorkmo]] 23:50, 30 August 2011 (CEST) | ||
| Line 5: | Line 6: | ||
[http://opensourceecology.org/wiki/Hydraulic_Hose_Sizing| Hose Sizing Guide] | [http://opensourceecology.org/wiki/Hydraulic_Hose_Sizing| Hose Sizing Guide] | ||
== Power Cube Tools == | |||
Can you tell me what tools are required to build a power cube? I don't mean the parts for the cube itself, but the tools used to build one. I am working on setting up a shop in my garage --[[User:RootBeer|RootBeer]] 00:17, 26 November 2011 (CST) | Can you tell me what tools are required to build a power cube? I don't mean the parts for the cube itself, but the tools used to build one. I am working on setting up a shop in my garage --[[User:RootBeer|RootBeer]] 00:17, 26 November 2011 (CST) | ||
Revision as of 14:24, 26 November 2011
Suction Hose Sizing
did u mention that there were some changes made to the lines going to the pump on the power cube? i was thinking that it might be good to change the hydraulic tank design so that the output is on the other side? last time i saw the hose looped around from one side to the other, i wasnt sure if thats what you had tweeked but just throwing the idea into the mix --Dorkmo 23:50, 30 August 2011 (CEST)
Sorry for the delayed reply - I'm just now figuring how to use User Talk. Yes, I'm changing the line going to the pump - increasing it to 1" diameter. The calculations for the hose size is on the following page:
Power Cube Tools
Can you tell me what tools are required to build a power cube? I don't mean the parts for the cube itself, but the tools used to build one. I am working on setting up a shop in my garage --RootBeer 00:17, 26 November 2011 (CST)
Here's my list from memory - I will probably add to it in time. Craigslist and Ebay are handy for finding used tools.
- Cutting torch - capable of cutting 1/2" steel. If you plan on building a LifeTrac, get one that can cut 1" steel. I bought mine at Home Depot.
- Vise Grip Pliers - Two or three pair
- 6" C Clamps - Two should be sufficient
- Metal Saw - I bought a DeWalt DW872, but anything that can cut 2" x 2" angle iron
- Drill and bits - 9/16" bit and a regular assortment of smaller bits
- Angle Grinder - I bought a 4" and a 7" and use them both
- Welder - You may have a preference, but after using the MillerMatic 200 MIG at FeF and now a small TIG, I prefer the more expensive Millermatic
- Welding Table - A steel table is helpful, but not necessary
- Chalk Marker - Important for marking steel to cut with torch
- Safety Equipment - Welding helmet, ear protection, safety glasses, steel toe boots, gloves, long sleeve shirt for welding
- Wrenches - Several sizes, including 3/4"
- Hex Keys - For the coupling set screws
- Tape Measure - Two, as one is always misplaced
- Paint Sprayer / Air Compressor - FeF used a gravity fed sprayer