PowerCube Install Hydraulic Components: Difference between revisions
Jump to navigation
Jump to search
Tom Griffing (talk | contribs) (Created page with "===Install Hydraulic Components=== * Install hydraulic suction filter in tank and hose barb in suction filter * Connect one end of suction hose to strainer hose barb, the other e...") |
(No difference)
|
Revision as of 04:21, 12 December 2011
Install Hydraulic Components
- Install hydraulic suction filter in tank and hose barb in suction filter
- Connect one end of suction hose to strainer hose barb, the other end to the hose barb on pump and secure with hose clamps
- Connect adapter, nipple and male quick coupler for fluid power output port
- Screw 3/4" male elbow into one end of oil cooler and female quick coupler to other end of elbow
- Screw 3/4" male elbow into other end of oil cooler and JIC to 3/4" NTPF swivel adapter to 1' hose
- Connect opposite end of hose to JIC to 3/4" NTPM adapter, then to filter head input
- Connect . . .