CEB Press/Manufacturing Instructions/Dirt-Keeper Plate: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
(→Tools) |
||
| (One intermediate revision by the same user not shown) | |||
| Line 8: | Line 8: | ||
*Hole punch with 1" dies | *Hole punch with 1" dies | ||
*Measuring Tape | |||
*Metal Marking Utensil | |||
=Materials= | =Materials= | ||
| Line 15: | Line 19: | ||
Note: This can be torched from the leftover plate from the hopper. Its OK if the corners are a bit chopped off, as they will be hidden and out of use under the primary arms. | Note: This can be torched from the leftover plate from the hopper. Its OK if the corners are a bit chopped off, as they will be hidden and out of use under the primary arms. | ||
= | =Steps= | ||
*Punch the 1" holes in the proper locations. | |||
[[Image:dirtkeeper.png|700px|The hole locations]] | [[Image:dirtkeeper.png|700px|The hole locations]] | ||
Latest revision as of 00:30, 23 December 2011
Main > Housing and construction > CEB Press > CEB press building instructions
Part Information
- The dirt-keeper plate prevents dirt from falling out of the drawer when it is fully retracted.
Tools
- Hole punch with 1" dies
- Measuring Tape
- Metal Marking Utensil
Materials
- Steel plate 1/8" x 28.75" x 13.5"
Note: This can be torched from the leftover plate from the hopper. Its OK if the corners are a bit chopped off, as they will be hidden and out of use under the primary arms.
Steps
- Punch the 1" holes in the proper locations.
