CEB Press/Manufacturing Instructions/Dirt-Keeper Plate

Main > Housing and construction > CEB Press > CEB press building instructions

Part Information

• The dirt-keeper plate prevents dirt from falling out of the drawer when it is fully retracted.

Tools

• Hole punch with 1" dies

• Measuring Tape

• Metal Marking Utensil

Materials

• Steel plate 1/8" x 28.75" x 13.5"

Note: This can be torched from the leftover plate from the hopper. Its OK if the corners are a bit chopped off, as they will be hidden and out of use under the primary arms.

Steps

• Punch the 1" holes in the proper locations.