Bent Loader Arms: Difference between revisions

From Open Source Ecology
Jump to navigation Jump to search
Line 6: Line 6:
==Metal==
==Metal==
*[4] 3/8"x10" pieces, 16" long (Loader arm bend gussets - instead of triangular shape)  
*[4] 3/8"x10" pieces, 16" long (Loader arm bend gussets - instead of triangular shape)  
*
*[2] larger angle -
*[2] smaller angle -
 
==Hydraulics==
==Hydraulics==



Revision as of 03:48, 20 February 2012

Upgrades for LifeTrac IV

Bentloader1.jpg File:Bentloader.pdf

Bill of Materials for LifeTrac III Conversion

Metal

  • [4] 3/8"x10" pieces, 16" long (Loader arm bend gussets - instead of triangular shape)
  • [2] larger angle -
  • [2] smaller angle -

Hydraulics

  • 2 917-2212 1/2" X 12" 1/2 NPTM X 1/2 NPTM 3500 14.00
  • 2 917-2224 1/2" X 24" 1/2 NPTM X 1/2 NPTM 3500
  • Add a 36" hose
  • 1 917-2260 1/2" X 60" 1/2 NPTM X 1/2 NPTM 3500 30.00
  • Add a 48" hose
  • 1 917-2272 1/2" X 72" 1/2 NPTM X 1/2 NPTM 3500 17.00
  • 2 917-22108 1/2" X 108" 1/2 NPTM X 1/2 NPTM 3500 48.00
  • 1 917-22120 1/2" X 120" 1/2 NPTM X 1/2 NPTM 3500 26.00
  • 1 917-22144 1/2" X 144" 1/2 NPTM X 1/2 NPTM 3500 30.00
  • 4 9-1501-8-8 1/2 NPTM x 1/2 NPTF 90 SWIVEL 13.60 (for valve outlets)
  • 4 9-1603-8-8-8 1/2 x 1/2 x 1/2 NPTF SWIVEL TEE 32.00 (2 for one cylinder)
  • 2 9-7710-20 2X20X1.25 DA HYD CYL 1 PINS HVY DUTY 301.90 YES
  • 2 9-6401-8-8 SAE 8M TO 1/2" NPTM CONNECTOR 3.50 (2 for initial cylinder)
  • 2 9-6901-8-8 SAE 8M x 1/2 NPTF 90 SWIVEL 11.00 (2 for terminal cylinder)
Bentloader1.png
Bentloader2.png
Bentloader3.png
Bentloader4.png