Torch Table Design Rationale: Difference between revisions
Jump to navigation
Jump to search
| Line 53: | Line 53: | ||
|---- | |---- | ||
|} | |} | ||
For this weight, acceleratio of motors is about 3/4 G | |||
[[Image:gantryannot3d.jpg]] | [[Image:gantryannot3d.jpg]] | ||
Revision as of 22:56, 16 February 2009
See Torch Table for development work.
Basic Design
- 6" wide by 1/4" u-channel frame
- Gear rack drive, 20 degree gear rack, 1/2" wide, 20 pitch (20 teeth per inch)
- 1" pinion gear, rides directly on rack
- z-axis of torch has manual adjustment
- Sacrificial slats may be used, or another workpiece table
- 495 in oz Stepper Motors from xylotex, 1/4" shafts
- About 31 in lb torque, or 1 G acceleration for a 60 pound gantry with 1" diameter driver gear
- Gantry weight -
X Axis Detail
Gantry detail
Gantry weight:
| ITEM | WEIGHT (LB) |
| stepper motor x 2 | 8 |
| 6x1/4x6' y track plate | 30 |
| torch head | 4 |
| 3/16 plate, 15 4x1/16 tubing | 7 |
| Delta support | 5 |
| 2x2" angle verticals | 7 |
| z axis cage | 7 |
| TOTAL | 85 lb |
For this weight, acceleratio of motors is about 3/4 G
