CNCCMV2/Overview: Difference between revisions
< CNCCMV2
Jump to navigation
Jump to search
| Line 3: | Line 3: | ||
*X Axis Travel = 200mm | *X Axis Travel = 200mm | ||
*Y Axis Travel = | *Y Axis Travel = 125mm | ||
*Z Axis Travel = | *Z Axis Travel = 30mm | ||
*Step Motor Resolution = 1.8 degrees per step | *Step Motor Resolution = 1.8 degrees per step | ||
| Line 13: | Line 13: | ||
*Step Motor Torque = 3.2kg-cm at 12VDC | *Step Motor Torque = 3.2kg-cm at 12VDC | ||
*Spindle Speed = | *Spindle Speed = 1050Kv | ||
*Repeatability Goal: +/- 0.01mm | *Repeatability Goal: +/- 0.01mm | ||
Revision as of 00:58, 9 April 2012
Performance
- X Axis Travel = 200mm
- Y Axis Travel = 125mm
- Z Axis Travel = 30mm
- Step Motor Resolution = 1.8 degrees per step
- Accuracy =
- Step Motor Torque = 3.2kg-cm at 12VDC
- Spindle Speed = 1050Kv
- Repeatability Goal: +/- 0.01mm
- Nominal Milling Speed (Copper on FR-4):
Design
- Major Frame Type: Mobile Gantry
- Minor Frame Type: Blocks on Plate, Double Drive X Axis
- Axis Drive: Step Motor
- Rotary-to-Linear: Ultra-smooth Threaded Rod and Wear-compensating Nut
- Anti-Friction: Bronze Sleeve Bearings
- Axis Supports: Precision Stainless Steel Shafts
- Working Platform: Magnets and Reference Holes on Platform
- Spindle Drive: Brushless DC Outrunner Motor
- Spindle Shaft: Precision Stainless Steel Shaft
- Control Electronics: Computer, Microcontroller, Stepper Driver
- Control Software: Gctrl (Gcode Streamer), GRBL (Gcode Interpreter)