Bent Loader Arms

Upgrades for LifeTrac IV

File:Bentloader.pdf

Bill of Materials for LifeTrac III Conversion

Metal

• [4] 3/8"x10" pieces, 16" long (Loader arm bend gussets - instead of triangular shape)
• [2] larger angle - 5x5, 5" long
• [2] smaller angle - 3x4, 4" long

Metal Total

• 3/8"x10" flat, 5'3"
• angle - 5"x5", 10" long
• angle - 3"x4", 8" long

Hydraulics

Part numbers from surpluscenter.com:

• [2] 905-1212 1/2" X 12" 1/2 NPTM X 1/2 NPTM 3000 12.00
• [2] 905-1224 1/2" X 24" 1/2 NPTM X 1/2 NPTM 3000
• [1] 905-2236
• [1] 905-1260 1/2" X 60" 1/2 NPTM X 1/2 NPTM 3000 28.00
• [1] 905-2248
• [1] 905-1272 1/2" X 72" 1/2 NPTM X 1/2 NPTM 3000 15.00
• [2] 905-12108 1/2" X 108" 1/2 NPTM X 1/2 NPTM 3000 46.00
• [1] 905-12120 1/2" X 120" 1/2 NPTM X 1/2 NPTM 3000 24.00
• [1] 905-12144 1/2" X 144" 1/2 NPTM X 1/2 NPTM 3000 28.00
• [4] 9-1501-8-8 1/2 NPTM x 1/2 NPTF 90 SWIVEL 13.60 (for valve outlets)
• [4] 9-1603-8-8-8 1/2 x 1/2 x 1/2 NPTF SWIVEL TEE 32.00 (2 for one cylinder)
• [2] 9-7710-20 2X20X1.25 DA HYD CYL 1 PINS HVY DUTY 301.90 YES
• [2] 9-6401-8-8 SAE 8M TO 1/2" NPTM CONNECTOR 3.50 (2 for initial cylinder)
• [2] 9-6901-8-8 SAE 8M x 1/2 NPTF 90 SWIVEL 11.00 (2 for terminal cylinder)