Cold Saw/V1 Design Files/Blade Guard: Difference between revisions
< Cold Saw | V1 Design Files
Jump to navigation
Jump to search
(Created page with "=Blade Guard= *'''Shape: Bent Flat Bar''' *'''Thickness: 1.5mm''' *'''Width: 76.2mm''' *'''Length: 580mm''' *'''Bend 90 degrees at 120mm''' *'''Bend 90 degrees at 460mm'''...") |
(No difference)
|
Revision as of 22:49, 23 May 2012
Blade Guard
- Shape: Bent Flat Bar
- Thickness: 1.5mm
- Width: 76.2mm
- Length: 580mm
- Bend 90 degrees at 120mm
- Bend 90 degrees at 460mm
- Mount Hole Spacing Along Width: 25mm, 50mm
- Mount Hole Spacing Along Length: 20mm, 560mm
- Mount Hole Diameter: 8mm