Cold Saw/V1 Design Files/Blade Guard: Difference between revisions
< Cold Saw | V1 Design Files
Jump to navigation
Jump to search
| Line 3: | Line 3: | ||
*'''Shape: Bent Flat Bar''' | *'''Shape: Bent Flat Bar''' | ||
*'''Thickness: 1. | *'''Thickness: 1.5875mm''' | ||
*'''Width: 76.2mm''' | *'''Width: 76.2mm''' | ||
Revision as of 00:32, 25 May 2012
Blade Guard
- Shape: Bent Flat Bar
- Thickness: 1.5875mm
- Width: 76.2mm
- Length: 940mm
- Outer Bend 90 degrees clockwise at 270mm
- Outer Bend 90 degrees clockwise at 670mm
- Mount Hole Spacing Along Width: 38.1mm
- Mount Hole Spacing Along Length: 20mm, 140mm, 800mm, 920mm
- Mount Hole Diameter: 12mm