Cold Saw/V1 Design Files/Blade Guard: Difference between revisions
< Cold Saw | V1 Design Files
Jump to navigation
Jump to search
| Line 7: | Line 7: | ||
*'''Width: 76.2mm''' | *'''Width: 76.2mm''' | ||
*'''Length: | *'''Length: 946mm''' | ||
*'''Outer Bend 90 degrees clockwise at 270mm''' | *'''Outer Bend 90 degrees clockwise at 270mm''' | ||
*'''Outer Bend 90 degrees clockwise at | *'''Outer Bend 90 degrees clockwise at 676mm''' | ||
*'''Mount Hole Spacing Along Width: 38.1mm''' | *'''Mount Hole Spacing Along Width: 38.1mm''' | ||
*'''Mount Hole Spacing Along Length: 20mm, 140mm, | *'''Mount Hole Spacing Along Length: 20mm, 140mm, 806mm, 926mm''' | ||
*'''Mount Hole Diameter: 12mm''' | *'''Mount Hole Diameter: 12mm''' | ||
Revision as of 00:54, 25 May 2012
Blade Guard
- Shape: Bent Flat Bar
- Thickness: 1.5875mm
- Width: 76.2mm
- Length: 946mm
- Outer Bend 90 degrees clockwise at 270mm
- Outer Bend 90 degrees clockwise at 676mm
- Mount Hole Spacing Along Width: 38.1mm
- Mount Hole Spacing Along Length: 20mm, 140mm, 806mm, 926mm
- Mount Hole Diameter: 12mm
- 2D Image
- 3D CAD STP
- 2D Fabrication Drawing PDF
- 2D Fabrication Drawing DXF