Cold Saw/V1 Design Files/Pin Collar: Difference between revisions
< Cold Saw | V1 Design Files
Jump to navigation
Jump to search
(Created page with "*'''Outside Diameter: 25.4mm''' *'''Inside Diameter: 8mm''' *Length: 15mm''' *'''Setscrew Hole Diameter: 6.8mm thru 1 side, then M8x1.25 tap. *'''Setscrew Hole Spacing Alon...") |
(No difference)
|
Latest revision as of 18:05, 25 May 2012
- Outside Diameter: 25.4mm
- Inside Diameter: 8mm
- Length: 15mm
- Setscrew Hole Diameter: 6.8mm thru 1 side, then M8x1.25 tap.
- Setscrew Hole Spacing Along Length: 7.5mm
- 2D Image
- 3D CAD STP
- 2D Fabrication Drawing PDF
- 2D Fabrication Drawing DXF